Cisco 7513 Series Schnellstart-Handbuch - Seite 26

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Server Cisco 7513 Series herunter. Cisco 7513 Series 44 Seiten. Chassis replacement
Auch für Cisco 7513 Series: Anleitung zum Ersetzen Handbuch (26 seiten), Datenblatt (11 seiten), Handbuch (30 seiten), Pflege von (20 seiten), Anleitung zum Ersetzen Handbuch (19 seiten), Anleitung zum Ersetzen Handbuch (22 seiten)

Seite drucken
Cisco 7513 Series Schnellstart-Handbuch
Install Field Replaceable Units (FRUs)
Format a Flash Memory Card
Flash memory cards shipped as spare parts must be
formatted. Use only Intel Series 2+ Flash memory
cards.
Step 1
Enter format slot0: (or format slot1:) to
format the Flash memory card, as follows:
Router# format slot0:
Step 2
At the erase all sectors prompt, press
Enter to proceed.
All sectors will be erased, proceed? [confirm]
Step 3
At the volume ID prompt, enter the ID
name:
Enter volume id (up to 30 characters):
MyNewCard
24
Formatting sector 1
Format device slot0 completed
Router#
Copy Files to Flash Memory
To upgrade to a new Cisco IOS image, copy the
image file to Flash memory. Upgrade images one at a
time; do not delete all known good images at one
time. You cannot copy an image while the system is
running from Flash memory.
Use the command copy tftp:filename [bootflash |
slot0 | slot1]: filename for the copy procedure, where
tftp:filename is the source of the file and [bootflash |
slot0 | slot1]: filename is the destination in bootflash
memory or on either of the Flash memory cards.
An example of the copy tftp:filename command
follows for a file in the Flash memory card in PC
Card slot 0:
Router# copy tftp:myfile1 slot0:myfile1
20575008 bytes available on device slot0,
proceed? [confirm]
Address or name of remote host [1.1.1.1]?
Loading new.image from 1.1.1.1 (via
Ethernet1/0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!![OK -
7799951/15599616 bytes]
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Router#