Cisco 7513 Series Anleitung zum Ersetzen Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Anleitung zum Ersetzen Handbuch für Server Cisco 7513 Series herunter. Cisco 7513 Series 22 Seiten. Chassis replacement
Auch für Cisco 7513 Series: Schnellstart-Handbuch (44 seiten), Anleitung zum Ersetzen Handbuch (26 seiten), Datenblatt (11 seiten), Handbuch (30 seiten), Pflege von (20 seiten), Anleitung zum Ersetzen Handbuch (19 seiten)

Prerequisites

Leave network interface cables connected to the interface ports only if the following conditions are

true:

•

Note

before you can install the new chassis, you must disconnect all power and network interface cables.

Also, ensure that your new chassis allows sufﬁcient clearance for maintenance—to remove and

replace processor modules, the blower module, and interface cables at the interface processor end,

and to access the internal components at the noninterface processor end.

Figure 2 shows the chassis footprint and the clearance required.

Figure 2

19 inches required

for blower removal

6 Cisco 7513 Chassis Replacement Instructions

You are able to place the new chassis close to the existing chassis, and moving the processor

modules to the new chassis will not strain the interface cables.

The new chassis is already located in its permanent location, or you will need to move it only a

few feet into the space vacated by the old chassis when it is removed.

If these conditions are not true, for instance, if you must remove a rack-mounted chassis

Chassis Footprint and Clearance Requirements for Maintenance

1.75 inches 4 places

18.93

inches

12.73 inches

18.75

inches

21.23

inches

3.94 inches

1.47

Plastic front

inches

panel end

14.57

inches

17.50

inches