Cisco AS5300 - Universal Access Server Schnellstart-Handbuch - Seite 19
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Server Cisco AS5300 - Universal Access Server herunter. Cisco AS5300 - Universal Access Server 25 Seiten. Access server
Auch für Cisco AS5300 - Universal Access Server: Anhang (10 seiten), Konfigurationshandbuch (46 seiten), Handbuch (21 seiten)
Seite drucken
--- System Configuration Dialog ---
When the following prompt appears, enter yes to continue:
Step 2
Would you like to enter the initial configuration dialog? [yes]: yes
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
When you are done selecting options and saving the script, the Cisco AS5300 displays the
indicates that you are at the command-line interface (CLI) and you have just completed the basic Cisco AS5300
configuration. However, this is not a complete configuration. At this point you have two options:
• Run the setup script again and create another configuration by entering the following commands:
5300> enable
Password: password
5300# setup
• Modify the existing configuration or configure additional features with the CLI as described in the Cisco AS5300
Universal Access Server Software Configuration Guide.
Initial Configuration Using the CLI (Manual Configuration)
This section shows how to bring up a command line interface (CLI) prompt for configuration using the CLI, and it directs you to
the documentation for CLI configuration.
Step 1
To proceed with manual configuration using the CLI, enter no.
Would you like to enter the initial configuration dialog? [yes/no]: no
Press Return to terminate autoinstall and continue with manual configuration.
Step 2
Would you like to terminate autoinstall? [yes] Return
Several messages are displayed, ending with a line similar to the following:
...
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled <date> <time> by <person>
Press Return to bring up the
Step 3
...
flashfs[4]: Initialization complete.
Router>
Step 4
Enter privileged EXEC mode.
Router> enable
Router#
The router is now ready for configuration using the CLI.
For configuration using the CLI, refer to the applicable configuration procedures in the Cisco AS5300 Universal Access Server
Software Configuration Guide.
You can access this document at: Cisco Product Documentation > Access Servers & Routers > Access Routers > Cisco AS5300
> Configuration Documents for Cisco AS5300 > AS5300 Software Configuration Guide
prompt.
Router>
prompt, which
5300>
19