Cisco MC2000 Handbuch "Erste Schritte - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Server Cisco MC2000 herunter. Cisco MC2000 42 Seiten. Firepower management center
Auch für Cisco MC2000: Anleitung Handbuch (20 seiten)

Seite drucken

255.255.255.0

The following prompt (appended with the current value) appears:

Management gateway?

Enter the gateway for the interface's IP address or press Enter to accept the current value. For example:

10.2.1.1

The following prompt appears:

Are these settings correct: (y or n)?

If the settings are correct, type y and press Enter to accept the settings and continue.

If the settings are incorrect, type n and press Enter. You are prompted to enter the information again.

After you have accepted the settings, log out of the shell.

What to Do Next



Complete the setup process using the procedures in

Initial Setup Page: Management Centers

For all Management Centers, you must complete the setup process by logging into the Management Center's web

interface and specifying initial configuration options on a setup page. You must change the administrator

password, specify network settings if you haven't already, and accept the EULA.

In Versions 5.4.x, the setup process also allows you to register and license devices. Before you can register a

device, you must complete the setup process on the device itself, as well as add the Management Center as a

remote manager, or the registration will fail.

Procedure

Direct your browser to

management interface:

—

For a Management Center connected to a computer with an Ethernet cable, direct the browser on that

computer to the default management interface IPv4 address:

—

For a Management Center where network settings are already configured, use a computer on your

management network to browse to the IP address of the Management Center's management interface.

admin

See the following sections for information on completing the setup:

—

Change Password, page 14

—

Network Settings, page 14

—

Time Settings, page 15

—

Recurring Rule Update Imports, page 15

—

Recurring Geolocation Updates, page 15

—

Automatic Backups, page 15

—

License Settings, page 15

—

Device Registration, page 16

—

End User License Agreement, page 17

Cisco Firepower Management Center Getting Started Guide

, where

https://mgmt_ip/

as the username and

Admin123

Installation and Initial Setup for Versions 5.4 - 6.4.x

Initial Setup Page: Management Centers, page

is the IP address of the Management Center's

mgmt_ip

https://192.168.45.45/

as the password.

13.