Cisco NCS 1001 Start Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Start Handbuch für Server Cisco NCS 1001 herunter. Cisco NCS 1001 40 Seiten. Data models configuration guide
Auch für Cisco NCS 1001: Handbuch (8 seiten), Konfigurationshandbuch (36 seiten)

Seite drucken

Revised: April 13, 2018,

Install NCS 1001-K9 into EIA/ANSI Rack

In an EIA/ANSI rack, NCS 1001 can be installed in the front position.

The rack is not provided by Cisco. Cisco provides only the chassis and the sliding rail.

Note

Use only the fastening hardware provided with NCS 1001-K9 to prevent loosening, deterioration, and

Caution

electromechanical corrosion of the hardware and joined material.

It is required to have 100 mm (3.94") space on the front and rear side of the rack to provide sufficient clearance for cable routing and

cooling of the system.

In case of a closed cabinet, the cabinet must support the thermal management or front/rear doors need to have 70% perforation. Closed

cabinets must have adequate airflow to dissipate maximum power from equipments in a fully-equipped cabinet.

NCS 1001-K9 shall be installed maintaining a minimum clearance of 5mm above and below the chassis.

Before You Begin

Ensure the rack is compatible. See the Rack Comatibility section.