B2 Audio RAGE 600.4 Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken B2 Audio RAGE 600.4 herunter. B2 Audio RAGE 600.4 16 Seiten.

Panel layout

rage600.4

INPUT CH1~CH4

RCA signal input for left & right on channel speci ed.

A minimum of 0.2V input signal is required for correct

operation.

Gain (6v~0.2v) CH1/2

Adjusts signal input voltage from the input source

to match the ampli ers input stage. 0.2V ~ 6V is the

operational voltage. Voltages beyond may cause errors

or damage to the input section. All adjustments apply to

channel 1 & 2.

hpf

Adjusts the high pass crossover point to lter out audio

with a 24 dB slope from the given selection on ch 1 & 2.

The switch selection sets the HPF in active or inactive.

If in ON mode frequencies below the setting will be cut

with 24 dB per octave. OFF setting is full range signal.

lpf

Adjusts the low pass crossover point to lter out audio

with a 24 dB slope from the given selection on ch 1 & 2.

If in ON mode frequencies above the setting will be cut

with 24 dB per octave. OFF setting is full range signal.

bpf

Adjusts the band pass crossover point to lter out audio

with a 24 dB slope from the given selection on ch 1 & 2.

If in ON mode frequencies above & below the setting will

be cut with 24 dB per octave. To use the BPF both HPF

ON and LPF ON needs to be selected.

Gain (6v~0.2v) CH3/4

Adjusts signal input voltage from the input source

to match the ampli ers input stage. 0.2V ~ 6V is the

operational voltage. Voltages beyond may cause errors

or damage to the input section. All adjustments apply to

channel 3 & 4.

hPF

See the description on the left side of the page.

LPF

See the description on the left side of the page.

bpf

See the description on the left side of the page.