B2 Audio RAGE1200.6 Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken B2 Audio RAGE1200.6 herunter. B2 Audio RAGE1200.6 13 Seiten.
Seite drucken
Strapped control panel setting / speaker wiring
rage 2500
L-CH
INPUT
R-CH
L-CH
INPUT
R-CH
Step 1. Connect RCA from Head Unit / output source into master
If only one output is available, then use a Y-split to connect both L & R.
Step 2. Locate the Master / Slave switch on the right side of the control panel on the Master
Set the switch to Master position.
step 3. Connect a single RCA from the RCA OUT on the master
Step 4. Locate the Master / Slave switch on the right side of the control panel on the Slave
Set the switch to Slave position.
Step 5. Connect the single RCA cable from the Master
BASS
GAIN SUBSONIC
BOOST
5V 0.2V 10Hz
50Hz 0dB
9dB
REMOTE
BASS
GAIN SUBSONIC
BOOST
5V 0.2V 10Hz
50Hz 0dB
9dB
REMOTE
Rca out to the slave
9
MASTER SLAVE
SLAVE-IN
LPF
PHASE
35Hz 250Hz 0
180
O
O
MASTER-OUT
MASTER SLAVE
SLAVE-IN
LPF
PHASE
35Hz 250Hz 0
180
O
O
MASTER-OUT
POWER
CLIP
PROTECT
POWER
CLIP
PROTECT
RCA IN.