Cisco SCE8000 GBE Installation von

Blättern Sie online oder laden Sie pdf Installation von für Server Cisco SCE8000 GBE herunter. Cisco SCE8000 GBE 21 Seiten. 10gbe platform
Auch für Cisco SCE8000 GBE: Schnellstart-Handbuch (25 seiten), Konfigurationshandbuch (18 seiten), Verfahren zum Entfernen und Ersetzen (36 seiten)

Installing the Cisco SCE8000 Chassis

Revised: November 8, 2010, OL-21054-04

Introduction

This chapter describes how to install a Cisco SCE8000 chassis.

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Statement 1030

Warning

There is the danger of explosion if the battery is replaced incorrectly. The battery is not a

user-serviceable part.

Statement 1015

Warning

Class 1 laser product.

Statement 1008

Because invisible laser radiation may be emitted from the aperture of the port when no cable is

Warning

connected, avoid exposure to laser radiation and do not stare into open apertures.

Statement 1056

Blank faceplates and cover panels serve three important functions: they prevent exposure to

Warning

hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)

that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not

operate the system unless all cards, faceplates, front covers, and rear covers are in place.

Statement 1029

Before you install, operate, or service the system, read the

Note

Information for the Cisco SCE8000

should know before working with the system.

OL-21054-04

C H A P T E R

Regulatory Compliance and Safety

Platform. This guide contains important safety information you

Cisco SCE8000 10GBE Installation and Configuration Guide

4-1