[E] CARD MEMORY OVERFLOW
This message indicates that the combined memory requirement of the cards in
slots A and B exceeds 4 Mbytes.
EPL-7000 cont.
[S] COPY END X/X
Multiple-copy printing is cancelled (you pressed the COPY END button when
the printer was off line).
[E] COVER OPEN
The printer cover is open or the imaging cartridge is not installed.
[S] DATA
The printer has received data but is not yet printing, or the printer has
received data and is off line.
[E] FEED JAM
Paper is not feeding into the printer from the specified cassette or has
jammed on its way into the printer.
[S] GRAPHIC DRAWING
Graphics are being created.
[E] ILLEGAL CARD
A card or cartridge in a particular slot cannot be read.
[S] INITIALIZE
The printer is being initialized (reset) to the factory settings.
[E] INSUFF.
MEMORY
The printer has insufficient memory available for the task you have given
it.
This error can also be cleared by turning the printer off and back on
again.
However, it may be necessary to simplify the page you are trying to
print or add more memory to the printer.
[E] PAGE BUFFER FULL
Text or graphics data has filled the printer's buffer and an incomplete page
is ejected.
[S] PAPER FEEDING
The printer is feeding paper.
[E] PAPER JAM
Paper is not being fed into the printer or paper is jammed inside the paper
path.
[E] PAPER OUT
There is no paper in the standard paper cassette
lower paper cassette (if installed).
manual position and you are not feeding pages correctly.
[E] PAPER OUT SET AUTO XXX
There is no paper in any of the paper cassettes.
display prompts you to load the correct paper size into the paper cassette.
[E] PAPER OUT SET OPT XXX
There is no paper in the optional lower paper cassette.
the display prompts you to load the correct paper size into the paper tray
of the lower paper cassette.
and
Or, the paper set lever is in the
The right column of the
the
optional
The right column of
Seite drucken