Epson ES-600C Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scanner Epson ES-600C herunter. Epson ES-600C 5 Seiten. Product support bulletin(s)
Auch für Epson ES-600C: Erste Schritte (13 seiten), Ergänzendes Handbuch (15 seiten), Handbuch (11 seiten), Produkt-Support-Bulletin (5 seiten), Produkt-Support-Bulletin (8 seiten)

Seite drucken
Epson ES-600C Benutzerhandbuch
ES-600C
Monochrome mode:
S c a n n i n g s p e e d :
about 20 seconds
Color page sequence mode:
about 70 seconds
Color line sequence mode:
about 80 seconds
By switching light sources (G, R, B)
Color separation:
Reading sequence: Monochrome mode:
One-time scanning (Dropout color
selectable from Green, Red, or Blue.)
Color page sequence mode:
Three-time scanning (G, R, B)
Color line sequence mode:
One-time scanning (G, R, B)
Size:
50% to 200% in 1% steps.
Image data:
8 bits per pixel per color maximum
Gradation:
8 bits per pixel per color maximum
Brightness:
7 levels
Halftoning process: Enable/disable selectable.
3 halftoning modes (A, B, and C) and
4 dither patterns (A, B, C, and D) for
bi-level data
(Halftoning mode A only in color line
sequence mode)
(2 downloadable dither patterns)
Halftoning mode A for quad-level data
Gamma correction: 2 for CRT display
3 for printer
1 for user defined
Color correction:
1 type for CRT display
3 types for printer output, available in
color line sequence mode only
Interface:
Bidirectional parallel or SCSI
Light source:
Noble gas fluorescent lamps (3 lamps)
Reliability:
Main unit: MCBF 100,000 cycles of
carriage movement
Dimensions and
Width: 333 mm (13 inches)
weight:
Depth:
Height: 125 mm (5 inches)
Weight: about 9 kg (20 lbs)
ES-600C-2
568 mm (22 inches)

Electrical Specifications

Voltage:
Frequency:
Power
consumption:
Insulation
resistance:

Environmental Conditions

Temperature:
Humidity:
Operating
conditions:
Note: Specifications are subject to change without notice.

The Control Panel

Buttons
OPERATE button
RESET button
Indicators
READY (green LED)
ERROR (red LED)
11/2/92
120 VAC, ± 10%
49.5 to 60.5 Hz
Approx. 20 W (self test in monochrome
mode)
10 Mn between AC power line and
chassis at 500 VDC
Operation: 40° F to 95° F (5° C to 35° C)
Storage: 10° F to 150° F (-20° C to 60° C)
Operation: 10% to 80%, without
condensation
Storage: 10% to 85%, without
condensation
Ordinary office or home conditions.
Extreme dust should be avoided.
Operation under direct sunlight
or near a strong light source should be
avoided.
Turns the scanner on and off. When
the power is turned on, the scanner
is reset.
Initializes the scanner. Every value is
reset to the default value. The RESET
button is located under the
DIP-switch cover.
Comes on when the scanner is ready
to receive data.
Indicates that an error has occurred.
Scanners