Cisco 2600 Series Konfiguration - Seite 13

Blättern Sie online oder laden Sie pdf Konfiguration für Gateway Cisco 2600 Series herunter. Cisco 2600 Series 15 Seiten. Configuring adsl wic to support pppoe clients
Auch für Cisco 2600 Series: Installationshandbuch (12 seiten), Anmerkungen zur Veröffentlichung (32 seiten), Anwendungshinweis (41 seiten), Datenblatt (6 seiten), Anhang (15 seiten), Installationshandbuch (22 seiten), Übersicht (13 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (5 seiten)

Cisco 2600 Series Konfiguration

2.3 RIP and OSPF Redistribution

2.3.1 RIP

If you like to redistribute routing information to OSPF, you have to tell RIP running
router process-id of OSPF and default-metric value. For example
Router(config-router)#redistribute ospf process-id
And default-metric value:
Router(config-router)#default-metric value
Value is a positive integer.

2.3.2 OSPF

In OSPF you have to mention any default-metric value, just give the next command, if
you like to transform routing information to RIP.
Router(config-router)#redistribute rip
In addition in classless addressing, you have to write subnets, like
Router(config-router)#redistribute rip subnets

2.3.3 Gateway

When you have a network with running a routing protocol and you like to connect it to
another network running B routing protocol throughout one or more routers, you have
to tell about border area router or gateway router with the following command. B
network is generally much bigger and for example the Internet.
Router(config-router)#default-information originate

2.3.4 LAN

If a LAN is connected to a router as shown in Fig. 3., you have to tell about it to the
router's routing protocol. Just write
Router(config-router)#redistribute connected
Figure 3. Redistributing to LAN
13
LAN