Cisco 2800 Series Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Gateway Cisco 2800 Series herunter. Cisco 2800 Series 13 Seiten. Cisco ios software configuration
Auch für Cisco 2800 Series: Datenblatt (8 seiten), Schnellstart-Handbuch (47 seiten), Anwendungshinweis (41 seiten), Schnellstart-Handbuch (45 seiten), Konfiguration (10 seiten), Übersicht (27 seiten), Datenblatt (5 seiten), Datenblatt (20 seiten), Konfigurieren von (32 seiten)

Seite drucken
Cisco 2800 Series Schnellstart-Handbuch

Connect the Cisco 800 Series Router to a Hub

Connect the Cisco 800 Series Router to a Hub
Follow these steps to connect the Cisco 800 series router to a hub:
Step 1
Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 801 and 802 routers) or from
the yellow Ethernet port with the number 0 (Cisco 803 and 804 routers) on the back panel of the router
to the Ethernet port on the hub.
Figure 3
Step 2
Verify that the HUB/NO HUB switch on the left side of the back panel has been set to the HUB position
(in). If the button is out, press it to set it to the in position.
Note
The HUB/NO HUB button corresponds to the Ethernet port on Cisco 801 and 802 routers and to
Ethernet port 0 on Cisco 803 and 804 routers.
Caution
Always connect the yellow cable or Ethernet cable that you supply to the yellow ports on the router.
Do not connect the cable to an ISDN S/T or U port or to a Network Termination 1 (NT1) device.
Accidently connecting the cable to the wrong port can damage your router.
Connect the Cisco 800 Series Router to a Hub
4
Connecting a Cisco 800 Series Router to a Hub
HU B
NO HU B
C is c o 8
ET HE RN
0 3
ET 10 BA
SE T
CO NS OL
E
IS DN S/
T
0
1
2
3
Cisco 803 router
PH ON E
1
2
1X
2X
10 /10 0
SP EE D
3X
4X
LE D
10 0B as
eT X
1
SO LI D
2 3 4
10 Ba se
T
BL IN K
5 6 7
8
5X
6X
7X
8X
MD I
MD I-X
Cisco 1528 Micro Hub 10/100
78-5374-03