Digitus Biometrics db iCardLock Installationshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installationshandbuch für Durch Schlösser Digitus Biometrics db iCardLock herunter. Digitus Biometrics db iCardLock 11 Seiten.
Seite druckenMounting the Door Interface Box – Step 2
•
Attach the Door Interface Box to the inside door surface. Only apply a slight amount of pressure to the high bond
tape until you have ensured that the Door Interface Box will not prevent the cabinet door from closing.
•
Once you have that the door will close properly and the finger sensor can attach to the lock, apply more pressure to
the high bond tape. The more pressure applied, the greater the bond.
Ensure that the Interface Box is located close enough to the lock opening in the door, so that the finger-sensor on the
ribbon cable can go through the door and connect into the lock, see Figure 5.
Model: db BioLock, db ELock, db iCardLock
Figure 4
Page 5 of 11
Digitus Biometrics, Inc. 2014