Epson Perfection 3200 Handbuch für Sicherheit und Garantie - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Sicherheit und Garantie für Scanner Epson Perfection 3200 herunter. Epson Perfection 3200 8 Seiten. Scanning application force quits on mac os 10.4
Auch für Epson Perfection 3200: Produkt-Support-Bulletin (34 seiten), Informationen zum Produkt (6 seiten), Start Handbuch (8 seiten), Software-Handbuch (34 seiten), Produkt-Support-Bulletin (23 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (24 seiten), Produkt-Support-Bulletin (29 seiten), Produkt-Support-Bulletin (8 seiten), Produkt-Support-Bulletin (3 seiten), Produkt-Support-Bulletin (14 seiten), Produkt-Support-Bulletin (18 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (11 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (22 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (21 seiten)

Seite drucken
Epson Perfection 3200 Handbuch für Sicherheit und Garantie

Important Safety Instructions

Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on
the scanner.
I
Place the scanner close enough to the computer for the interface cable to reach it easily. Do not place or
store the scanner outdoors, on an unstable surface, near excessive dirt or dust, water, heat sources, or in
locations subject to shocks, vibrations, high temperature or humidity, direct sunlight, strong light sources,
or rapid changes in temperature or humidity. Do not use with wet hands.
I
Place the scanner near an electrical outlet where the power cord can be easily unplugged.
I
Allow space behind the scanner for the cables, and space above the scanner so that you can raise the
document cover fully.
I
Unplug the scanner before cleaning. Clean with a damp cloth only. Do not use liquid or aerosol cleaners.
I
Keep out of reach of children.
I
Use only the type of power source indicated on the scanner's label.
I
Power-supply cords should be protected from abrasion, cuts, crimping, and kinking. Be sure to place your
cords to avoid any damage. Do not place objects on top of the power cord or allow the power cord to be
stepped on or run over. Be particularly careful to keep all power-supply cords straight at the ends and the
points where they enter and leave the transformer.
I
Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as
photocopiers or air control systems that regularly switch on and off.
I
Do not let the power cord become damaged or frayed.
I
If you use an extension cord with the scanner, make sure the total ampere rating of the devices plugged
into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating
of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. Do not place
multiple loads on the electrical outlet.
I
Never disassemble, modify, or attempt to repair the scanner, integrated TPU, or power cord.
I
Do not insert objects into any openings as they may touch dangerous voltage points or short out parts.
Beware of electrical shock hazards.
I
This product includes a lamp that contains mercury. Please consult your state/province and local
regulations regarding disposal or recycling. Do not put it in the trash.
I
If you are not going to use the scanner for a long period, be sure to unplug it from the electrical outlet.
I
Unplug the scanner and refer servicing to qualified service personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the scanner; if the scanner has been dropped or
the case damaged; if the scanner does not operate normally or exhibits a distinct change in performance.
(Do not adjust controls that are not covered by the operating instructions.)