Digitus professional DN-82110 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter Digitus professional DN-82110 herunter. Digitus professional DN-82110 4 Seiten. Gigabit fiber ethernet converter

Seite drucken

Technical parameters:

Standard Protocol:

IEEE802.3 10 Base-T standard

IEEE 802.3u 100Base-TX/FX standard

IEEE 802.3z 1000Base-TX/FX standard

Connector: one UTP RJ-45 connector, one SC/ST/SFP connector

Operation mode: full duplex mode or half duplex mode

Environmental temperature: 0°C-60°C

Relative humidity: 5%-90%

TP cable: Cat5 UTP cable

Transfer fiber:

multi-mode: 50/125, 62.5/125 or 100/140μm

single mode: 8.3/125, 8.7/125, 9/125 or 10/125μm

Max. 2M buffer memory built in chip

Automatic identification of MDI/MDI-X cross line

10.

High-performance 1.4Gbps memory bandwidth.

Cautions:

1. This product is suitable for indoor application.

2. Put on the dust cover of fiber interface when not used.

3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.

4. Single optical fiber transceiver must be used in pair (See the attachment description in

delivery). Example: DN-82122 and DN-82123

Trouble shooting:

1. Device is not matched. Please select the corresponding network device according to the

transfer rate of the product (10Mbps or 100Mbps) when connected to other network

devices (network card, hub, switch).

2. Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in and fiber

soldering welding, and excessive intermediate nodes may cause excessive loss rate or

abnormal operation.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping

content. If the Declaration of Conformity is missing, you can request it by post under the below

mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany