Cisco EVM-IPVS-16A Verbinden Sie

Blättern Sie online oder laden Sie pdf Verbinden Sie für Gateway Cisco EVM-IPVS-16A herunter. Cisco EVM-IPVS-16A 15 Seiten. Analog video gateway network modules

Seite drucken

Connecting Cisco Analog Video Gateway

Network Modules to the Network

Revised: May 1, 2008, OL-16670-01

This guide describes how to connect Cisco Analog Video Gateway network modules to your network. It

contains the following sections:

•

Information About the EVM-IPVS-16A Network Module

The EVM-IPVS-16A network module enables Cisco integrated services routers to capture analog video

signals. The EVM-IPVS-16A network module supports up to 16 simultaneous composite video inputs,

such as video surveillance cameras. The EVM-IPVS-16A network module also provides alarm input

detection, control relay outputs, and RS-485 serial communication interfaces.

EVM-IPVS-16A network module faceplate.

You need a router that supports the EVM-IPVS-16A network module. For a list of supported platforms,

Note

see the Cisco Analog Video Gateway Network Module (EVM-IPVS-16A) Data Sheet.

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Information About the EVM-IPVS-16A Network Module, page 1

How to Install, Connect, or Replace the EVM-IPVS-16A Network Module, page 5