Cisco Linksys WAG200G Benutzerhandbuch - Seite 25

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gateway Cisco Linksys WAG200G herunter. Cisco Linksys WAG200G 39 Seiten. Linksys wireless-g adsl home gateway

Seite drucken

1. Setup > Basic Setup

Chapter4

Restore

To restore the Gateway's configuration settings,

click this button and follow the on-screen instructions.

Administration > Factory Defaults

This screen allows you to restore the Gateway's

configuration to its factory default settings.

Administration > Factory Defaults

NOTE:

Restoring factory defaults deletes all

custom settings. To retain your custom settings,

use the Administration > Back Up & Restore screen

to back up the settings before you restore the

factory defaults.

Factory Defaults

Restore Factory Defaults

To reset settings to the default

values, select Yes. Any custom Gateway settings you have

saved will be lost when the default settings are restored.

Click Save Settngs to apply your changes, or click Cancel

Changes to cancel your changes.

Administration > Firmware Upgrade

The Firmware Upgrade screen allows you to upgrade the

Gateway's firmware. Do not upgrade the firmware unless

you are experiencing problems with the Gateway or the

new firmware has a feature you want to use.

Wreless-G ADSL Home Gateway

Advanced Configuration

Firmware Upgrade

Before upgrading the firmware, download the Gateway's

firmware upgrade file from the Linksys website,

www.linksys.com/international. Then extract the file if

needed.

Please Select a Fle to Upgrade

the extracted firmware upgrade file.

Upgrade

After you have selected the appropriate file,

click this button, and follow the on-screen instructions.

Language

To use a different language, select one from the

drop-down menu. The web-based utility will switch to the

new language five seconds after your selection is made.

Administration > Reboot

The Reboot screen allows you to reboot your Gateway.

Reboot Mode

To reboot your Gateway, select Hard or

Soft. Choose Hard to power cycle the Gateway or Soft

to restart it without a power cycle. Use a Hard reboot to

restart all applications and processes from a clean state.

To begin the reboot process, click Save Settngs. When a

screen appears asking you if you really want to reboot the

Gateway, click OK. Click Cancel to cancel the reboot.

Click Browse and select