Cisco SM-X-24FXS/4FXO Hardware-Installationshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Gateway Cisco SM-X-24FXS/4FXO herunter. Cisco SM-X-24FXS/4FXO 40 Seiten. Voice gateway
Seite drucken
- 1. Table of Contents
- 2. Location and Mounting Requirements
- 3. Temperature Control and Ventilation
- 4. Rack Requirements
- 5. Access to Chassis
- 6. Power Source and Supply
- 7. Network Cabling Considerations
- 8. Interference Considerations
- 9. Required Tools and Equipment for Installation
- 10. Site Log
- 11. Installation Checklist
Slot, Bay, and Ports
devices tightly integrated with the IP-based phone system is advantageous for increased manageability,
scalability, and cost-effectiveness. The Direct Inward Dialing (DID) port is used to provide off-premises DID
connection from the central office. It serves only incoming calls from the PSTN. The Caller ID feature is not
supported in DID mode.
The following table provides information about Cisco 400 Voice Gateway SKU:
Table 2: Cisco 400 Voice Gateway FXS-E/DID, REN, Failed-over Port Support
Interface
Maximum Number of FXS-E Ports
VG400-2FXS/2FXO
2
VG400-4FXS/4FXO
4
VG400-6FXS/6FXO
6
VG400-8FXS
8
Table 3: Slot, bay, and port information for Cisco VG400 FXS Port
Interface
2FXS/2FXO
0/1/0-1
4FXS/4FXO
0/1/0-3
6FXS/6FXO
0/1/0-5
8FXS
Table 4: Slot, bay, and port information for Cisco VG400 FXO Port
Interface
2FXS/2FXO 0/1/2-3
4FXS/4FXO 0/1/3-7
6FXS/6FXO
0/1/6-11
Cisco VG400 Voice Gateway Hardware Installation Guide
6
Maximum Number or RENs
10
12
12
16
Slot
Bay
Por t
0
1
0-1
0
1
0-3
0
1
0-5
0
1
0-7
Slot
Bay
Port
0
1
2-3
0
1
3-7
0
1
6-1 1
Introduction to Cisco VG400 Voice Gateway
RJ-11
Number of Failed-over Ports
Connectors
FXS: 1x2
2
FXO: 1x2
FXS: 1x4
4
FXO: 1x4
FXS: 1x2 1x4
6
FXO: 1x2 1x4
FXS: 1x4 1x4
—