Cisco SM-X-8FXS/12FXO Hardware-Installationshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Gateway Cisco SM-X-8FXS/12FXO herunter. Cisco SM-X-8FXS/12FXO 40 Seiten. Voice gateway
Seite drucken
- 1. Table of Contents
- 2. Location and Mounting Requirements
- 3. Temperature Control and Ventilation
- 4. Rack Requirements
- 5. Access to Chassis
- 6. Power Source and Supply
- 7. Network Cabling Considerations
- 8. Interference Considerations
- 9. Required Tools and Equipment for Installation
- 10. Site Log
- 11. Installation Checklist
Analog Phone Connectivity
• FXO failover bypass ports—A failover bypass port, also called a failover trunk bypass, provides a way
In addition to these features, Cisco 400 Voice Gateway also supports the following features:
• Caller line ID
• G.711, G.729a, and G.726
• G722, iLBC, GSMAMR-NB, and Internet Speech Audio Codec (iSAC)
• Fax detection, pass-through, and relay (T.38)
• Modem pass-through
• DTMF detection
• Echo cancellation
• Voice activity detection
• Comfort noise generation
• Real-Time Control Protocol (RTCP)
• Acoustic shock protection
• Real-Time Transport Protocol (RTP)
• RFC 4733 Digit Relay
• Noise reduction is on the roadmap
The FXS features include:
• Support for either FXS or DID functionality
• Message-Waiting Indicator (MWI)
• Cable detection: GR909 line test
• The FXO features include:
• Support for both ground-start and loop-start modes
• Support for FXO CAMA signaling type
• Call Detail Record (CDR) information
• Support for interworking with Cisco Unified Communications Manager (Skinny Client Control Protocol
• Cable detection
• Overload protection
Analog Phone Connectivity
Cisco 400 Voice Gateway are ideal for analog phone deployments ranging from centralized to sparsely
concentrated or distributed topologies. Cisco 400 Voice Gateway offer many supplementary analog calling
features, depending on the call control and signaling type used. All supplementary analog features are supported
through the FXS and FXO ports. The analog interface on Cisco 400 Voice Gateway also supports Feature
Access Codes (FACs) for invoking supplementary services.
Fax and Modem Connectivity
FXS ports on Cisco 450 Voice Gateway support fax machines and modems. When using fax machines, the
gateways support T.38 fax relay and fax pass-through. T.38 fax relay technologies allow transfer of faxes
Cisco VG400 Voice Gateway Hardware Installation Guide
2
• Higher ringing voltage (65 Vrms, no load)
to use designated analog phone ports to make phone calls through the PSTN during a power outage.
[SCCP]), H.323, Session Initiation Protocol (SIP), and Media Gateway Control Protocol (MGCP) 0.1
Introduction to Cisco VG400 Voice Gateway