Cisco VG202 Hardware-Installationshandbuch - Seite 35

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Gateway Cisco VG202 herunter. Cisco VG202 48 Seiten. Voice gateways
Auch für Cisco VG202: Software-Konfigurationshandbuch (50 seiten), Hardware-Installationshandbuch (50 seiten), Handbuch (10 seiten), Schnellstart-Handbuch (19 seiten)

Chapter 3

Installing the Voice Gateway

Place the power supply on a horizontal surface.

Step 3

If you are mounting the voice gateway on drywall, use hollow-wall anchors (1/8 inch with 5/16-inch drill

Caution

bit, or M3 with 8-mm drill bit) to secure the screws. If the screws are not properly anchored, the strain

of the network cable connections could pull the voice gateway from the wall. Use two wall anchors with

washers. Wall anchors and washers must be size number 10.

Setting the Chassis on a Desktop

You can place the voice gateway chassis on a desktop or shelf.

Caution

Do not place anything on top of the chassis that weighs more than 10 lb (4.5 kg). Excessive weight on

top can damage the chassis.

Procedure

Place the four rubber feet (from the accessory kit) in the four indentations on the underside of the chassis.

Step 1

This helps provide proper airflow through and around the chassis.

Place the chassis onto a smooth, flat surface.

Step 2

You must connect the chassis to a reliable earth ground; the ground wire must be installed in accordance

with local electrical safety standards.

•

OL-15959-01

Two number-six, 3/4-in. screws

Voice gateway

Maximum distance between the voice

gateway and the power supply (6 ft [1.8 m])

Distance between the screw and the wall

(5/32 in. [0.40 cm])

For NEC-compliant grounding, use size AWG 14 (2 mm2) or larger wire and an appropriate

user-supplied ring terminal.

For EN/IEC 60950-compliant grounding, use size AWG 18 (1 mm2) or larger wire and an

appropriate user-supplied ring terminal.

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide

Distance between the two screws (5 7/16 in.

[13.8 cm])

Mounting-screw slots

Horizontal surface on which to place the

power supply

3-7