Epson ProofPlus TM-H6000III Handbuch Entwicklung - Seite 26

Blättern Sie online oder laden Sie pdf Handbuch Entwicklung für Scanner Epson ProofPlus TM-H6000III herunter. Epson ProofPlus TM-H6000III 26 Seiten. Ecc printer
Auch für Epson ProofPlus TM-H6000III: Produkthandbuch (27 seiten), Broschüre (2 seiten), Spezifikationen (2 seiten), Broschüre (6 seiten), Benutzerhandbuch (32 seiten), Handbuch Entwicklung (45 seiten), Handbuch Entwicklung (32 seiten), Handbuch (10 seiten), Benutzerhandbuch (29 seiten)

Section 4. Warnings

This section describes precautions in use of TM-H6000III.

Due to hardware limitations and the position of the Slip, it is not possible to

change the printing side and then search for the position where printing should

start. In this case, OPOS_E_ILLEGAL (OPOS_EX_INVALIDMODE) is returned.

Before switching the printing side, the Transaction data and the data for

90-degree rotated printing are printed on the current printing side, and

Transaction is automatically set to PTR_TP_NORMAL and Rotate is set to

PTR_RP_NORMAL.

This is because different functions are used for the two printing sides (the print

head is different) and this factor may cause an improper result if the data is not

printed on the printing side selected when the printing command is issued.

Because this processing is performed before the position of the Slip is checked in

order to take the above mentioned restrictions into consideration, there may be

instances where the above error is generated after the buffered data is printed, or

the printing side may not be switched.

In the SetBitmap method, a data set to print on the face side cannot be printed on

the backside.

The width limitation on 90-degree rotated printing to the right is limited to 831 dots

for printing on receipt. For printing on slip, it is limited to 704 dots.

If 2-color thermal paper is selected from the "Device Specific Settings" dialog box,

2-color thermal receipt paper must be used in the printer.

APPLICATION DEVELOPMENT GUIDE

POSPrinter (TM-H6000III)

Version 3.00 Feb. 2019