Epson RX500 - Stylus Photo Color Inkjet Start Here Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Start Here Handbuch für Scanner Epson RX500 - Stylus Photo Color Inkjet herunter. Epson RX500 - Stylus Photo Color Inkjet 9 Seiten. Product support bulletin(s)
Auch für Epson RX500 - Stylus Photo Color Inkjet: Benutzerhandbuch (15 seiten), Benutzerhandbuch (20 seiten), Produkt-Informationsblatt (4 seiten), Spezifikationen (2 seiten), Setup-Handbuch (2 seiten), Benutzerhandbuch (12 seiten), Update (1 seiten), Produkt-Support-Bulletin (6 seiten), Produkt-Support-Bulletin (1 seiten), Gebrauchsanweisung (4 seiten)

Seite drucken

Epson RX500 - Stylus Photo Color Inkjet Start Here Handbuch

Selecting the RX500 in Mac OS X

Open the OS X Applications folder,

then open the Utilities folder and

start Print Center or the Printer

Setup Utility.

Note: If you see a screen asking if

you'd like to add a printer, click Add.

On the next screen, select EPSON USB from the pull-down menu.

Click Stylus Photo RX500.

Note: If the RX500 doesn't appear,

make sure it is turned on and

securely connected to your

Macintosh.

Open the Page Setup menu

at the bottom of the screen and

select All.

Click the Add button. The Printer List

includes two entries for your printer.

Close Print Center or the Printer

Setup Utility.

Now start up your Macintosh in OS 9.x. Follow the instructions in the

previous column to install the OS 9.x drivers and optional software for

Macintosh Classic programs.

Selecting the RX500 in Mac OS 8.6 to 9.x

Open the Chooser from the Apple menu.

Select the SP RX500 Series icon, then

select your USB port and turn on

background printing.

Close the Chooser.

Now you're ready to copy, scan, and print.

See "Any Questions?" to the right to find out how.

Any Problems?

If the red

error light is on, check the messages on the RX500 LCD screen.

They give you guidance for solving problems.

If your problem is listed here, try these suggestions. For more information,

see your software Help, User's Guide, or your on-screen Reference Guide.

A New Hardware Wizard

appears on your screen.

You see an error

message when you

print or scan.

The RX500 doesn't

work.

Click Cancel and follow the steps in

section 8. Disconnect the RX500 before

installing the software.

Make sure your RX500 is connected to your

computer, plugged into a power source, and

turned on.

Try turning the printer off and then back on to

clear the error.

Unlock the printer by removing and storing the

orange plastic print head holder. See section 4.

Slide the transportation lock under the

lid to unlock the scanner. See section 2.

Make sure the ink cartridges are pushed

all the way down. See section 6.

Try connecting the USB cable to a different

USB port on your computer. See section 8.

If it still doesn't work, try reinstalling the

software. See section 8.