Acuity Brands nLight rPOD Micro Anleitung Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Schalter Acuity Brands nLight rPOD Micro herunter. Acuity Brands nLight rPOD Micro 6 Seiten. Wireless wall switch
Seite drucken
Battery Replacement
1
Remove the wall plate (WallPod only).
Insert a screwdriver into the slot on the bottom of the device and
2
twist to disengage the first side snap.
4
Replace the battery, sliding the replacement into the battery cradle
in the orientation shown (flush side visible).
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/03/2023
IS-RPODU-002
rPOD Micro
WIRELESS WALL SWITCH
FAMILY INSTRUCTIONS
3
Slide the screwdriver under side of unit to disengage additional
snaps.
5
Align the device and press to engage the snaps. Ensure all 8 snaps
are fully engaged. This may require sliding the screwdriver along
each side.
6 of 6