Digiview RC305EL Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Uhr Digiview RC305EL herunter. Digiview RC305EL 5 Seiten. International travel clock

Seite drucken

Once the atomic time signal is received, the date and time

will be set automatically, and the [ ] icon appear above

the second digits, on the upper right corner of the display.

If the time signal has not been received in 15 minutes,

refer to the directions for setting the time and date manually.

CALENDAR AND CLOCK DISPLAY MODES

The International Travel Clock has four different display

modes which may be accessed by pressing the MODE button:

* TIME mode (HOUR/MINUTES/SECONDS)

* TIME ZONE SETTING mode

* DST (Daylight Savings Time)

* RF RECEPTION mode

MANUAL SETTINGS

If you choose to disable the atomic time signal reception,

please follow the steps below to set the clock manually.

TIME

* Select the TIME (Hour/Minutes/Seconds) display

mode by pressing the MODE button

* Press and hold the MODE button

for 3 seconds until M (month) and

D (date) begin to flash.

* Press UP (+) or DOWN (–) to select the desired

calendar format – MM/DD or DD/MM.

* After the calendar format is

selected, press the MODE

button to move to the next

parameter. The PM abbreviation

will flash in the top left corner

right under the DST icon.

* Press UP (+) or DOWN (–) to select 12 or 24 hour time format.

* Press the MODE button to enter

into the day of the week selection

mode – the abbreviation "EN"

will flash on the lower right

corner of the display.

DST (Daylight Savings Time) MODE

Daylight Savings Time mode control gives the opportunity

to adjust the clock's time to Daylight Savings automatically,

manually, or turn off this feature completely.

* Press the MODE button to select

the Daylight Savings Time (DST)

mode. The mode is selected

correctly if the abbreviation "DST"

is displayed on the top left corner of the display and the

word "Auto" is on the top right one.

* Press and hold the MODE button until the "DST" and

"Auto" will flash

* Press UP (+) or DOWN (-) buttons selecting the setting

for Daylight Savings Time – ON, OFF or Auto.

* After the desired setting is selected press the MODE

button to confirm the selection.

If the "ON" or "AUTO" is selected, the clock will

automatically synchronize with the Daylight Savings

Time in spring and fall. If Daylight Savings Time does

not apply to your geographic area, an "OFF" setting

has to be selected.

RF RECEPTION MODE

RECEPTION MODE SELECTION

You can choose between the auto-scan, single-band

reception and RF reception OFF modes.

* Enter the RF RECEPTION mode

by pressing the MODE button until

the abbreviation "SEL" is displayed.

* Press and hold the MODE button

for 2 seconds – the reception icon [

] will start to flash

along with the line above AUTO.

* Press UP (+) to select the auto-scan (AUTO), single-

band (SEL) or reception OFF (OFF).

* Press MODE to confirm the selected reception type.

* Press UP (+) or DOWN (–) to select the language for

day of the week – English, German, French, Italian,

Spanish or Dutch.

* Press MODE button to enter into

the programming mode of the

time display format – the seconds

digits will flash.

* Press UP (+) or DOWN (–) to adjust seconds, minutes,

hour, year, month and day

* Press the MODE button for the last time to confirm the

settings after the last parameter is set.

TIME ZONE

PROGRAMMING THE TIME ZONE

* Select the Time Zone display

mode by pressing the MODE

button – "ZONE" abbreviation

will be displayed on the lower

left corner next to "DST" and "-8h"

* Press and hold the MODE

button until "-8h" flashes.

* Use the UP (+) or DOWN (-)

buttons to change the TIME

ZONE hour in +/- 12 hour range

Example: If the atomic time received from the Atomic

Clock located in Japan (JJY60) is 3:00pm (Japan time)

and the TIME ZONE is set to +8 hours (Hong Kong

Time Zone), then the local time display will be 2:00pm

If "ON" or "AUTO" is selected, the clock will

automatically synchronize with the Daylight Savings

Time in spring and fall. If Daylight Savings Time

does not apply to your geographic area, an "OFF"

setting has to be selected.

* Press the MODE button to confirm the settings and

return to the default LOCAL TIME display.

SINGLE COUNTRY RF BAND RECEPTION (SEL)

* Once the SEL (Single Country

Band reception) is selected, the

abbreviation SEL will flash

with AUTO and all countries

abbreviations underlined.

* Press UP (+) or DOWN (-) selecting the desired single

reception band – WWVB-60(US), MSF-60(UK),

DCF-77.5(EUR), HBG-75(SWISS), JJY40(JPE)

or JJY60 (JPW).

* Once the desired band is selected, press the MODE

button to confirm. The relevant country abbreviation

will be underlined and will remain on the display.

MANUAL ACTIVATION OF THE ATOMIC

TIME SIGNAL SEARCH

Press and hold the UP (+) button in any mode - the unit

will beep once and the reception bars will appear above

the reception icon.

DISABLING THE ATOMIC

TIME SIGNAL SEARCH

Press and hold the DOWN (–) button in any display mode –

the unit will beep once and the reception bars will disappear

from the left corner, leaving just a dot reception icon.

RADIO SIGNAL RECEPTION ICON (

Once the reception mode is activated, the radio reception

[ ] icon will start flashing. The wave above the dot icon

shows the radio signal reception strength. The strength

of the reception is shown in the range from zero (weakest)

to six (strongest) bars.

Once the reception mode is activated, the International

Travel Clock will search for the atomic time signal for

about 15 minutes.

An auto activation takes place twice a day at 1:05AM and

3:05AM, the manual activation may occur at any time

after pressing and holding the UP (+) button until the

reception icon appears.

)