Epson Stylus CX4600
Error Indicators
To diagnose some problems, check the control panel lights
and the
window for these error conditions:
Copy
Copy
Light: status
window
Cause
Error
: On
—
No paper is
On
: Flashing
loaded in the
sheet feeder.
—
Multiple pages
have been fed
into the sheet
feeder.
Error
—
: Flashing
Paper is jammed.
Ink
: Flashing
—
An ink cartridge is
running low on
ink.
Ink
: On
—
An ink cartridge is
empty or not
installed correctly.
Error
: Flashing
1
A memory card is
Print Index
inserted that is
Sheet
,
Print
not supported by
From Index
the CX4600.
Sheet
, and
Print All/
The inserted
DPOF
:
memory card
Flashing
does not contain
any valid images.
Error
2
: Flashing
An index sheet
Print From
was not
Index Sheet
:
recognized
Flashing
because it is not
positioned
correctly.
3
The index sheet
is marked
incorrectly.
(No marks are
detected or the
sheet includes
more than one
mark for an
image.)
4
The index sheet
does not match
the photos on the
memory card.
Epson Stylus CX4600
10 -
Light: status
Error
fast
Solution
Load paper, then
x
press
Start Color
to continue or
y
Error
Stop to cancel.
Ink
Remove and reload
All other lights:
the paper. Then
Flashing
x
press
Start Color
All lights:
to continue or
y
Flashing
Stop to cancel.
See "Clearing a
Paper Jam" below.
See "Replacing Ink
Cartridges" on
page 11.
See "Replacing Ink
Cartridges" on
Clearing a Paper Jam
page 11.
Remove the
incompatible
If paper is jammed, the red m
memory card. (See
steps to clear the jam:
"Supported Memory
1. Press the x
Cards" on page 4.)
See "Supported
Memory Cards" on
2. If the paper is stuck near the sheet feeder or output tray,
page 4.
Position the index
sheet correctly on
the glass, aligning
the top of it with the
left edge of the
glass. Then press
x Start Color to
continue.
Remove the index
Cleaning the Print Head
sheet, mark it
correctly, and try
again. (See page 8.)
If your printouts are unexpectedly light, colors are not correct,
or dots or lines are missing, you may need to clean the print
head. This unclogs the nozzles so they can deliver ink
properly.
Remove the memory
Checking the Print Head Nozzles and Ink
card and insert the
card used to print the
Follow the steps below to check the print head nozzles and
index sheet—or
remaining ink levels using the control panel.
place the correct
index sheet on the
1. Turn off the CX4600.
glass. Then press
2. Load letter-size paper in the sheet feeder.
x Start Color to
continue or y Stop
to cancel.
6/04
Copy
window
Cause
H
: Flashing
The paper
thickness lever is
set to the
position.
: On
E
A part on the
: On
CX4600 needs to
be replaced.
E
There is a
problem with the
CX4600.
button to eject the jammed paper.
Start Color
If the jammed paper is not ejected, go on to the next step.
gently pull it out.
If the paper is stuck inside the CX4600, press the P
button to turn it off. Open the scanner and remove any
paper inside, including any torn pieces. Do not pull it
backward however; this can damage the sheet feeder. Then
turn the CX4600 back on.
Solution
If you have set the
^
lever to the
H
^
H
position because you
are printing
envelope(s), press
x Start Color to
continue. Otherwise,
set the lever to the
m
L
position.
Contact your local
authorized servicer or
Epson for a referral.
Turn the CX4600 off
and then back on. If
the error does not
clear, contact your
local authorized
servicer or Epson for
a referral.
light flashes. Follow these
Error
On
Seite drucken