Epson Stylus CX6000 Series Handbuch - Seite 15

Blättern Sie online oder laden Sie pdf Handbuch für Scanner Epson Stylus CX6000 Series herunter. Epson Stylus CX6000 Series 19 Seiten. Ink cartridge for use with stylus cx5000; cx6000; cx7400; cx8400; cx9400f; cx9475f printers;
Auch für Epson Stylus CX6000 Series: Start Here Handbuch (8 seiten), Update (1 seiten), Handbuch (4 seiten)

Seite drucken

Checking the Ink Supply

To check your ink supply, do the following:

❏ Windows: Double-click the

taskbar (in the lower right corner of your screen). You see

a window like the following:

❏ Macintosh OS X: Open the

EPSON Printer Utility

printer list, click

, and select

You see a window like this:

Removing and Installing Ink Cartridges

Make sure you have a new ink cartridge before you begin.

Once you start replacing a cartridge, you must complete all

the steps in one session.

Warning:

Keep ink cartridges out of the reach of children.

Be careful when you handle used ink cartridges; there may be ink

remaining around the ink supply port. If ink gets on your skin, wash

it off with soap and water. If it gets in your eyes, flush them

immediately with water.

Do not put your hand inside the CX6000 Series or touch any

cartridges during printing.

printer icon on your

folder and select

Applications

. Select

in the

CX6000 Series

EPSON Status Monitor

Click a cartridge

image to display

information

about it.

Caution:

Do not open ink cartridge packages until you are ready to install the

ink. Cartridges are vacuum packed to maintain reliability.

Install a new ink cartridge immediately after removing an expended

one. Leaving cartridges uninstalled can dehydrate the print head

and may prevent the CX6000 Series from printing.

Leave the expended cartridge installed until you have obtained a

replacement, or the ink remaining in the print head nozzles may dry

out. To ensure good results, use genuine Epson ink cartridges and

do not refill them. Other products may cause damage to your

CX6000 Series not covered by Epson's warranty.

If you remove an ink cartridge for later use, protect the ink supply

area from dirt and dust and store it in the same environment as the

CX6000 Series. Note that there is a valve in the ink supply port,

making covers or plugs unnecessary, but care is needed to prevent

the ink from staining items that the cartridge touches. Do not touch

the ink cartridge ink supply port or surrounding area.

If you remove a low or expended ink cartridge, you cannot reinstall

and use the cartridge.

1. Make sure the CX6000 Series is on.

2. Make sure that the document cover is closed, then open the

scanner.

Caution:

Do not open the scanner when the document cover is open.

3. Check the photo viewer screen to determine which cartridge

needs to be replaced. Then do one of the following:

❏ If the ink cartridge is expended, press the x

button.

❏ If the cartridge is low on ink or you are replacing an old

cartridge, press the

button to select

cartridges

4. Press the x

Start

6/06

Epson Stylus CX6000 Series

button. Press the

Setup/Utilities

Press Start to change

Then press the

button.

Start

button again.

Start