7
Connect the EPSON Stylus
Scan to your computer
and install the software
You'll follow different instructions, depending on
what type of system you have:
Windows
Windows 95 or 98 with Parallel Connection
Macintosh
USB port
Before you start, make sure you have the two CD-ROMs that came in the
box with your EPSON Stylus Scan. If you don't have a CD-ROM drive.
Contact EPSON as described in your User's Guide.
Windows 98 with USB:
Making the connection
First you'll connect the EPSON Stylus Scan to your computer, then you'll
install the software.
To connect the printer, you'll need a shielded USB "AB" interface cable, not
more than 6.5 feet long.
Connecting Your EPSON Stylus Scan
1. Make sure your computer is turned on.
2. Turn on the printer by pressing the
3. Connect the square end of the USB
cable to your printer's USB port.
4. Connect the flat end of the cable to your computer's USB port or USB hub port.
Windows detects your printer.
5. Follow the instructions in the next section to install your software.
If you're using a USB hub, connect the printer to a first tier
CAUTION
hub. If the printer doesn't work with the hub, connect it
directly to a USB port on your computer.
Installing Your Driver Software
Make sure you have your Microsoft
NOTE
available. If you don't have this CD-ROM, make sure you know
where to find the Windows 98 driver files on your hard disk (for example, in the
Win 98 folder.) If you need help, contact your computer manufacturer. Don't click
Cancel at any time during the installation process.
3. When you see the message that Windows has finished installing, click
Finish. Windows detects a USB printer.
4. Remove the Windows 98 CD-ROM (if necessary) and insert the EPSON
Stylus Scan 2000 CD-ROM.
5. Repeat step 1. When you see the window shown below, select Specify
a location, click Browse, and locate the \EPSON folder on your EPSON
Stylus Scan 2000 CD-ROM.
6. Click Next, then follow the
instructions on the screen to
complete the installation. You
may need to switch between
the EPSON Stylus Scan 2000
CD-ROM and your Windows 98
CD-ROM several times.
You see the Screen Calibration utility.
®
98 with USB Connection
®
with USB Connection
Parallel port
power button.
®
Windows 98 CD-ROM
1. Click Next, then continue clicking
Next on each window that appears.
2. If you see a message asking for
your Windows 98 CD-ROM, insert it
and click OK. (Or select Specify a
location, click Browse, and locate
the Windows 98 driver files on
your hard disk drive.)
7. Move the slider right or left until the stripes match as closely as possi-
ble. Then click OK.
8. Click Finish. Then continue with the instructions in the next section.
Finishing the Software Installation
Windows detects the scanner portion of your EPSON Stylus Scan 2000.
1. Click Next, then continue clicking Next on each window that appears.
2. Make sure the EPSON Stylus Scan 2000 CD-ROM is in your drive. If you
need to specify a location, click Browse, and locate the \EPSON folder
on your EPSON Stylus Scan 2000 CD-ROM. Then click Next and follow
the instructions on the screen.
3. When you see a message that Setup is complete, click OK, then click
Finish.
4. Double-click My Computer on your desktop.
5. Double-click the Epson_ss2000 CD-ROM icon.
Then double-click Cdsetup.
6. Click the
Add Software button.
8. Follow the on-screen instructions to install the EPSON Smart Panel.
When the installation is complete, you see the EPSON Stylus Scan
Setup window. Click Next.
Continue with the instructions in the next section.
®
Installing Adobe
PhotoDeluxe
Software
1. Follow the on-screen instructions to install Acrobat
After each installation is complete, the next one begins automatically. Don't
restart your computer until all the programs have been installed. You may
need to switch between the EPSON Stylus Scan 2000 CD-ROM and your
Microsoft Windows 98 CD-ROM again.
2. If you see a message requesting a disk labeled 'DLL. Installations,' click OK,
click Browse, click OK, then click OK again.
3. After WinFax has installed, click Finish to restart your computer. Follow the
instructions on the screen to configure and register WinFax.
4. Insert your PhotoDeluxe CD-ROM. Follow the instructions to accept the license
agreement and install PhotoDeluxe.
5. When you see another message asking to restart your computer, click OK.
Windows restarts.
Now you're ready to print, scan, and copy. See your User's Guide for instructions.
Windows 95 or 98 with parallel :
Making the connection
First, you'll connect the EPSON Stylus Scan to your computer, then you'll
install the software.
To connect the printer, you'll need a high-speed, bidirectional, IEEE-1284
parallel cable, not more than 6 feet long.
If you have a USB port (Windows 98 only), we recommend using it rather than
the parallel port. See the previous section for instructions.
7. Click OK.
9. Select USB, then...
click Next.
®
and Additional
®
®
Reader and WinFax
.
Seite drucken