Digiway SL500 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Türöffnungssystem Digiway SL500 herunter. Digiway SL500 9 Seiten. Sliding gate motor drive

Seite drucken

OFF. The gate controller will back to working mode. Factory default auto close time is 30

seconds

To restore factory setting, turn power off and set DIP1 on, push and hold CLS button then power

on. While hold CLS button, set DIP1 off, release the CLS button. Now controller restored factory

setting from memory.

7. Chain dirve Systme Setup

This is the drawing for chain drive setup. Not need to mention the details and all those are quite simple

mechncial work.

8. Power Supply and drive type

This motor has three different power can be choose. 240V, Low voalteg and Solar.

If has 240V power near at the gate, then use 240V version SL500 eithe encoder or limit control.

If no 240V power at gate, but has 240V power in the gararge or house, then choose SL500LV low

volatge model. Run12V low volatge to the gate. Suggest use 2.5mm garden light cables either direclty

bury in the ground or in conduit.

If no 240V power at ht egate and nearby, then use solar. 20W or 40W 12V solar panel and 12V7Ah

battery is good enough for normal use. If gate is more feqencly used and the sun light is not very good,

then properly inceasing solar panel power and battery size.