EPSON Stylus Scan 2500
Control Panel
LCD panel
Scan
Paper Size
Darker/Lighter
Reduce/Enlarge
B&W/Color
Hold for Menu
The LCD panel displays the current copy settings. When you
first turn on the EPSON Stylus Scan, you see these default
settings:
100% B&W Normal 1
produce one black and white copy, of the same size as the
original document, at Normal quality (360 dpi resolution for
everyday copying).
Accessing Menu Mode
You can use the control panel's Menu Mode to print a status
sheet, set the bottom margin, change from U.S. to metric
paper sizes, set the language on the LCD panel, or reset the
control panel to the factory defaults.
To access Menu Mode, hold down the
buttons until
Quality
Menu Mode
panel.
To exit Menu Mode, hold down the
buttons until the LCD panel displays the copy
Quality
mode settings.
Loading Paper
To load paper, slide out the left edge guide and place the stack
of paper against the right side of the sheet feeder. Then slide
the left edge guide against the paper.
Slide the left edge
guide against the
paper.
7 - EPSON Stylus Scan 2500
Copy
Stop/Clear
Quality
Copies
Error
Set
Return
Item
. This means you're set to
B&W/Color
appears in the LCD
and
B&W/Color
Cut corner
If the paper has a cut
corner, make sure you
load it as shown.
Testing the Printer
You can run a printer check to determine whether the
problem comes from the EPSON Stylus Scan or your
computer.
1. Make sure both the EPSON Stylus Scan and your computer
Operate
are turned off.
2. Disconnect the interface cable from the EPSON
Stylus Scan.
3. Make sure paper is loaded.
4. Hold down the E load/eject button, then press and
release the POperate button. Continue holding down the
E load/eject button until the
then release it.
A check page is printed, showing the ROM version number,
ink counter, and a nozzle check pattern.
5. After the page is printed, turn off the power. Then
reconnect the interface cable and turn on your EPSON
Stylus Scan and computer.
and
If the results are satisfactory, the problem lies in your
software settings, the interface cable, or your computer.
If the check page does not print correctly, you may have
a problem with your EPSON Stylus Scan.
Using Special Media
Selecting Special Media
When you print on special media, you need to choose the
correct Media Type and Paper Size settings in your printer
software. The table below lists the available EPSON media
and the corresponding Media Type setting for each one.
Media name
Plain paper sheets or envelopes
EPSON 360 dpi Ink Jet Paper
EPSON Iron-On Cool Peel Transfer Paper
EPSON High Quality Ink Jet Paper
EPSON Photo Quality Ink Jet Paper
EPSON Photo Quality Ink Jet Cards
EPSON Photo Quality Self Adhesive Sheets
EPSON Photo Paper
EPSON Photo Quality Glossy Paper
EPSON Photo Quality Glossy Film
EPSON Photo Stickers
EPSON Ink Jet Transparencies
EPSON Matte Paper–Heavyweight
9/99
light starts to flash,
Operate
Media Type setting
Plain paper
360 dpi Ink Jet Paper
Photo Quality Ink Jet
Paper
Photo Paper
Photo Quality Glossy Film
Ink Jet Transparencies
Matte Paper–
Heavyweight
Seite drucken