Acuity Brands sensorswitch SFR5 Anweisungen zur Programmierung
Blättern Sie online oder laden Sie pdf Anweisungen zur Programmierung für Zubehör Acuity Brands sensorswitch SFR5 herunter. Acuity Brands sensorswitch SFR5 2 Seiten. Occupancy sensor
Seite drucken
PROGRAMMING INSTRUCTIONS
PLEASE READ ALL 4 STEPS BEFORE PROGRAMMING
1.
Enter a specific programming function by pressing button the number of times as
the desired function number from the tables on the reverse (e.g., press twice for
function 2, Occupancy Time Delay).
2.
The selected function's current setting will then be read out in a sequence of LED
flashes (e.g., five flashes for 10 min). To change setting, proceed to step 3 before
sequence repeats 3 times.
3.
While the sensor is flashing back current setting, interrupt it by pressing button the
number of times for the new desired setting as indicated in the particular function's
detailed table (e.g., press seven times for 15 min). Sensor will begin to flash new
setting as confirmation.
4.
Once new setting has flashed back three times, sensor will exit programming
mode and LED will revert to flashing when occupancy is detected.
Note: To exit programming mode without saving or to change to a different function, wait
for blink back sequence to repeat 3 times then return to step 1.
OCCUPANCY SENSOR
Technical Support: 1.800.727.7483
DOC# IC1-002
Date Code 1611