DigiWeigh A12 Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Skalen DigiWeigh A12 herunter. DigiWeigh A12 7 Seiten.

when the stable signal is on, it displays [End] and keeps the original full range point

calibration. Press the calibration switch under the lead sealing board at the back of the

indicator, it saves the setting and back to the weighing status.

3.2.2 Fast calibration for full range point:

At any time before it shows [AdLOAD], press [ACCU], it keeps the original division,

decimal point, full range, zero point calibration and enter into the full range point

calibration mode. When it is finished, press the calibration switch under the lead sealing

board at the back of the indicator, it saves the setting and back to the weighing status.

EER 1

EER 2

EER 3

EER 4

EER 5

EER 6

bAt-lo

5.1 Turing on the AC power, the indicator will recharge the battery automatically. So if

you don't use battery frequently, you should take battery out.

■

Note: red end is +, black end is -. Wrong connection will destroy indicator.

■

Note: The built-in battery should be fully charged before it is used for the first time.

5.2 Only when you turn off the AC power, and push start key, battery works. Displaying

[LouoL] means the insufficient of voltage, it needs charge.

5.3 When you use the battery first time, you should charge the battery for 20 hours in

order to prevent low voltage resulted from the self leakage of the battery.

5.4 If you don't use battery for a long time, you should charge the battery for 10-12

hours for each 2 month to prolong using life of battery.

5.5 The battery is easily exhausted products. And it is not granted free guarantee.

Floor / Pallet Scale

Chapter 4 Error Indication

The AD value is too small when calibrated.

The zero point is out of range when calibrated.

The zero point is out or range upon starting

The imputed sample number is zero when sampling n counting

mode.

The imputed weight is zero when full scale calibrated in

calibrating mode.

The unit weight is less than 0.25e when sampling in counting

mode

Low power

Chapter 5 Recharge Battery