DigiWeigh DW97PBM04 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Skalen DigiWeigh DW97PBM04 herunter. DigiWeigh DW97PBM04 16 Seiten. Digital counting scales

Seite drucken

1. Scale Calibration

ENTERING A KNOWN UNIT WEIGHT

 If the unit weight is already known then it is possible to enter that value

using the keypad.

 Enter the value of the unit weight using the numeric keys followed by

pressing the U.Wt key. The "Unit Weight" display will show the value

as it was entered.

 Add the sample to the scale and the weight will be displayed as well as

the quantity based upon the unit weight.

 When weighing in kilograms the unit weight is shown in grams. When

weighing in pounds the unit weight is displayed in pounds.

STORING A UNIT WEIGHT

Up to 10 unit weights may be stored in the scale memory and recalled later.

 Obtain the unit weight by sampling or by entering it as described in the

above sections.

 Press and hold the U.Wt key for approximately 2 seconds

 Press any of the numeric keys (0-9) to store the unit weight in the

corresponding memory.

RECALLING A STORED UNIT WEIGHT

 Clear the scale display and set the zero point and Tare any container

on the scale.

 Press and release the numeric key corresponding to the location of the

stored unit weight.

 The Count Display will begin flashing.

 Now double click U.Wt key (Press twice quickly)

 The stored unit weight will appear in the unit weight display and you

may begin counting..

Page 11 of 16