Epson 480SX Handbuch für Installation und Betrieb - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Drucker-Zubehör Epson 480SX herunter. Epson 480SX 11 Seiten. Product information guide
Auch für Epson 480SX: Produkt-Informationsblatt (4 seiten), Broschüre (2 seiten)
Seite drucken
Ink Cartridge Precautions
Before you replace an ink cartridge, follow these precautions:
Keep ink cartridges out of the reach of children and do
not drink the ink.
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water.
To avoid damaging the printer, never move the print head
by hand.
Don't open the clamp or remove a cartridge except to
replace it with a new one. Once you remove a cartridge,
you can't reuse it, even if it contains ink.
You must remove the yellow tape from the top of the
cartridge or you will permanently damage it. Don't pull off
the blue portion or try to remove the clear seal
underneath the cartridge.
Replacing a Low or Empty Ink Cartridge
When Status Monitor 3 indicates that ink levels are low or
you're out of ink, you see one of these windows:
Ink low
Ink out
Before you begin, make sure you have a new ink cartridge and
have read the ink cartridge precautions above. Once you start
the ink cartridge replacement procedure, you must complete
all the steps in one session.
1. Click the
button.
How to
2. Follow the instructions on the screen to replace the ink
cartridge.
3. After you've installed the cartridge, the printer begins
charging ink for a few minutes. Wait until you see a message
telling you that charging is complete before resuming
printing.
Never unplug the printer while it's charging ink.
Replacing an Outdated Ink Cartridge
If you need to replace an ink cartridge before you see a Status
Monitor 3 message, follow the steps here to use the Ink
Cartridge Replacement utility. Before you begin, make sure
you've read the ink cartridge precautions to the left.
You can only access the Ink Cartridge Replacement utility
from the Windows Printers utility, as described in the steps
below. You can't run the utility from within a Windows
application.
1. Make sure the printer is plugged in but not printing.
2. Click
, point to
Start
3. Right-click the
EPSON Stylus COLOR 480
from the menu that appears.
Properties
4. Click the
tab, then click the
Utility
button.
Replacement
5. Follow the instructions on the screen to replace the
ink cartridge.
6. After you've installed the cartridge, the printer begins
charging ink for a few minutes. Wait until you see a message
telling you that charging is complete before resuming
printing.
Never unplug the printer while it's charging ink.
Cleaning the Print Head
If your printed image is unexpectedly light or faint, or dots or
lines are missing from the image, you may need to clean the
print head. This unclogs the nozzles so they can deliver ink
properly.
You can check to see if any nozzles are clogged by running the
Nozzle Check utility. Then, if you need to clean the print
heads, you can do so from the utility. See the next section for
instructions.
If you don't want to check the nozzles first, you can run the
Head Cleaning utility to clean the print head, as described
page 8.
Cleaning the print head uses ink, so clean it only if print
quality declines.
When you don't turn on your printer for a long time, the
print quality can decline. It's a good idea to plug in your
printer at least once a month to maintain good print
quality.
If any paper you buy comes with a cleaning sheet, don't
use the cleaning sheet with your printer; it may jam
inside the printer.
6/00
EPSON Stylus COLOR 480SX
, then select
Settings
Printers
Ink Cartridge
EPSON Stylus COLOR 480SX
.
icon and click
- 7