Acuity Brands Lighting KAX LED Einbauanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Einbauanleitung für Beleuchtungsanlagen Acuity Brands Lighting KAX LED herunter. Acuity Brands Lighting KAX LED 5 Seiten.

Seite drucken

Installation Instructions

KAX LED

Push up on the entire head in the direction of the arm. The

head can be rotated in 90 degree increments. Light throw

direction will be in the direction of the arrow. There is a stop

in place so that it will not rotate more the 270 degrees.

Once in position, re-install the screws (Figure 8) that were re-

moved in Figure 7. Tighten to 20 ft-lbs. Check to make sure

that no wires are going to be pinched.

Reinstall the door and tighten the captive screws (Figure 6).

TILT option (Tilting the luminaire head)

The knuckle allows luminaire head rotation to the left and

right forward facing directions.

Note: If rotation to the left or right is desired follow Figures

6-8 (except reinstalling door and captive screws) from the

rotation section above. Rotation of the head needs to take

place before tilting.

To tilt the luminaire head loosen the 3/8 bolt in the knuckle

(Figure 9).

With bolt loosened, tilt head to the desired position.

Tilt angle indicators are on the side of the knuckle (Figure 10).

Make sure the luminaire head is not hitting the luminaire arm

(Figure 11).

Note: Maximum tilt in the front facing position is 80

degrees maximum tilt to the left and right 60 degrees.

Tighten the knuckle bolt to 15-20 ft-lbs (Figure 10).

Reinstall the door and tighten the captive screws (Figure 6).

Lithonia Lighting Outdoor

One Lithonia Way, Conyers, GA 30012

Phone: 800-279-8041 Fax: 770-918-1209

www.lithonia.com

Figure 8

Figure 9

Figure 10

Part Number: RJ521393 Rev A

Revision Date: 4/28/16