Epson R1900 - Stylus Photo Color Inkjet Printer Handbuch - Seite 10
Blättern Sie online oder laden Sie pdf Handbuch für Drucker-Zubehör Epson R1900 - Stylus Photo Color Inkjet Printer herunter. Epson R1900 - Stylus Photo Color Inkjet Printer 19 Seiten. C11c698201
Auch für Epson R1900 - Stylus Photo Color Inkjet Printer: Teileliste (9 seiten), Start Here Handbuch (8 seiten)
Seite drucken
Epson Stylus Photo R1900 Series
If it is crooked or the front edge is visible, you may receive a
paper jam error when you print. To avoid this, press the
roll paper button for three seconds to back the paper
M
out. Press the
I
paper button to clear the paper out error,
and load the roll paper or canvas media again.
10. For roll paper, turn the knobs on the roll paper holders
backward to remove excess slack. (Leave 2 to 3 inches of
slack for canvas media.)
11. Close the printer cover and do not open it during printing.
Remove Prints on Roll Paper or Canvas Media
1. Press the
M
roll paper button to feed the roll paper forward.
2. Cut off your printed photos straight across the paper at the
cutting guideline.
Do not pull on the paper as you cut it to avoid
Caution:
damaging your printout. Also do not cut the paper too close to
the printer to avoid paper feeding problems.
3. To continue printing on roll paper, press the
button again to return the paper to printing position.
4. Turn the knobs on the roll paper holder backward to
remove excess slack. (Leave two to three inches of slack for
canvas media.)
5. After cutting off your printed photos, you can remove the
roll paper or canvas media from the printer. Press the
M
roll paper button for three seconds to feed the paper
backwards and out of the printer. If it does not feed all the
way out, press the
M
roll paper button again.
6. Turn the knobs on the roll paper holder backward to roll up
the paper, then remove the paper and holders from the
printer.
7. Press the
I
paper button to stop the
flashing.
Store the unused roll paper or canvas media in its original
package away from high temperatures, humidity, and direct
sunlight.
Epson Stylus Photo R1900 Series
10 -
M
roll paper
I
paper light from
11/07
Loading a CD or DVD
You can use your Epson Stylus
design directly onto ink jet-printable CDs or DVDs to create
a custom label.
You can print on CDs or DVDs using the Epson Print CD
computer software that came with your printer. See the on-
screen Reference Guide for instructions.
Before you load a CD or DVD, be sure to clean the rollers
inside the printer.
If you're using discs where the printable area extends to within
Note:
0.16 inch (4 mm) of the edge of the center hole, you may need to
adjust the Inner Diameter setting in the File menu of the Epson Print
CD software. See the on-screen Reference Guide for instructions.
Cleaning the Roller
Before you print on a CD or DVD, it's a good idea to clean
the rollers inside the printer by feeding several sheets of plain
paper through it.
1. Turn on the printer.
2. Open the paper support and output tray.
3. Load several sheets of plain paper in the sheet feeder.
4. Press the
I
paper button to feed the paper through the
printer.
5. Press the
I
paper button again to eject the paper.
6. Feed several sheets of paper in this way to completely clean
the rollers.
Inserting a CD or DVD
You can print on any compatible, ink jet-printable CDs or
DVDs.
1. First burn files, music, or video onto your CD/DVD before
printing on it to prevent errors.
2. Turn on the printer.
3. Remove any paper loaded in the sheet feeder and remove
the single sheet guide, if it is installed. Also close the paper
support.
Photo R1900 Series to print a
®