Epson R800 - Stylus Photo Color Inkjet Printer Informationen zum Produkt - Seite 12
Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Drucker-Zubehör Epson R800 - Stylus Photo Color Inkjet Printer herunter. Epson R800 - Stylus Photo Color Inkjet Printer 17 Seiten. Product support bulletin(s)
Auch für Epson R800 - Stylus Photo Color Inkjet Printer: Start Here Handbuch (6 seiten), Benutzerhandbuch (12 seiten), Produkt-Support-Bulletin (6 seiten), Produkt-Support-Bulletin (1 seiten)
Seite drucken
Epson Stylus Photo R800
4. Follow the instructions on the screen. The printer prints
and examines the nozzle check pattern shown below. If
cleaning is necessary, it then cleans the print head and prints
and checks another nozzle check pattern.
5. The utility prints and checks up to five times. If some print
head nozzles are still clogged, it displays an on-screen
message telling you to manually clean the print head.
Follow the instructions below to clean the print head using
the Head Cleaning utility, if necessary.
If you still have print quality problems, check the solutions in
the User's Guide. You can also turn the printer off and wait
overnight—this allows any dried ink to soften—and then try
cleaning the print head again.
Running the Head Cleaning Utility
1. Make sure the printer is turned on but not printing, and the
red H ink light is off. (If the H ink light is flashing or on, you
need to replace a cartridge; see page 11.)
2. Do one of the following:
Windows: Right-click the
lower right corner of your screen). Select
Mac OS X: Open the
Applications
EPSON Printer Utility
click
, and select
OK
Head Cleaning
Mac OS 8.6 to 9.x: Choose
Click the
utility icon, then click
3. Follow the instructions on the screen to clean the print
head.
Epson Stylus Photo R800
12 -
icon on your taskbar (in the
Head Cleaning
folder and select
. Select
in the printer list,
SP R800
.
or
File > Page Setup
Head Cleaning
Cleaning takes about two minutes, during which the printer
makes noise and the green P power light flashes.
Caution: Never turn off the printer while the green
is flashing, unless the printer hasn't moved or made noise for more
than 5 minutes.
4. When the green P power light stops flashing, make sure
paper is loaded in the printer. Click
pattern
Confirmation
check pattern prints.
5. If the nozzle check pattern has no gaps or lines (as shown
below), click
.
If the pattern has white lines or gaps (as shown below), click
to clean the print head again.
Clean
.
Print
.
If you don't see any improvement after cleaning three or four
times, check the solutions in the User's Guide. You can also
turn the printer off and wait overnight—this allows any dried
ink to soften—and then clean the print head again.
1/04
, then click
(Windows) or click
Print
, then click
(Macintosh). The nozzle
Next
.
Finish
P
power light
Print nozzle check