Motorola 4500 Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Mobiltelefon Motorola 4500 herunter. Motorola 4500 41 Seiten.

Seite drucken

Basic Operation

Unsuccessful Call Attempts

If you hear one of the following signals, you have

not successfully completed your call.

Tone

Description

Tone

Cellular System Busy

Fast Busy

Press S again before ending the

(reorder

unsuccessful call attempt to

signal)

automatically redial the call (see

System

"Automatic Redial", below), or press

Busy

E and dial the call again.

Cellular System Could Not

Alternating

Complete the Call

High/Low

You may have tried to place a call

Tone

before the

(intercept)

ON/LOCK

let you know your phone was fully

operative. Either press S again to

Service

redial, or press E and dial the call

again.

Slow Busy

Called Party's Line is Busy

Signal

Automatic Redial

Your telephone includes a convenient feature

designed to make repetitive call attempts when a

cellular system is busy.

If you receive an alternating high/low signal

(intercept) or the fast busy tone (reorder signal)

followed by snd to redial in the display when

attempting to place a call and wish to retry the

call, press S before ending the unsuccessful call

attempt. Redial is then displayed.

Your telephone will make the call attempt

continuously over the next four minutes. If four

indicator was lit to

minutes is insufficient time, press S to begin

another cycle. If the call attempt is successful, the

phone will ring to alert you of the connection.You

may terminate Automatic Redial by turning off the

phone or by pressing E.

NOTE Automatic Redial applies when the system

is busy and will not engage when the called

party's line is busy.

End a Call

Press E or return the handset to its mount.

The I I n n U U s s e e indicator will extinguish. If you have

activated the Automatic Hands Free feature, you

must press E to terminate the call.

Receive a Call

Lift the handset to your ear or press S if

an external microphone is present.

Power must be on to receive calls.

Call in Absence Indicator

If your phone is on and an incoming call is

unanswered, Call is displayed.

Press C or E to cancel the message and

clear the display.

In carry phone configuration, the display will go

blank after 6 seconds in order to conserve battery

energy.

Reactivate the display by pressing any key

except C, E, or P.

NOTE The phone will not display or retrieve the

phone number of the calling party.

Basic Operation