Epson UB-E01 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker-Zubehör Epson UB-E01 herunter. Epson UB-E01 8 Seiten.
EMC Standard Applied
Product Name: UB-E01
Model Name: M155A
The following standards are applied only to the interface boards that are so labeled. (EMC is tested using the
EPSON PS-170 power supply and TM series printers.)
Europe
CE marking
North America
EMI: FCC/ICES-003 Class A
Japan:
EMC: VCCI Class A
Oceania
EMC: AS/NZS 3548 Class B
WARNING
The connection of a non-shielded interface cable to this board will invalidate the EMC standards of this
device. You are cautioned that changes or modifications not expressly approved by SEIKO EPSON
Corporation could void your authority to operate the equipment.
CE Marking
The printer conforms to the following Directives and Norms:
Directive 89/336/EEC
EN 55022 Class B
EN 55024
The printers in which this board is installed do not conform to the following:
Directive 90/384/EEC
EN 45501
FCC Compliance Statement
For American Users
For American Users
For American Users
For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
For Canadian Users
For Canadian Users
For Canadian Users
For Canadian Users
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
CAUTION:
Connecting an outdoor overhead LAN cable directly to your product
Connecting an outdoor overhead LAN cable directly to your product
may lead to lightning damage. If you need to connect such a cable to
your product, the cable must be protected against an electrical surge
between the cable and your product. You should avoid connecting your
product to a non-surge protected outdoor overhead LAN cable.
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
4