Epson ActionTower 3000 Computer Dieses Handbuch zuerst lesen - Seite 28

Blättern Sie online oder laden Sie pdf Dieses Handbuch zuerst lesen für Desktop Epson ActionTower 3000 Computer herunter. Epson ActionTower 3000 Computer 29 Seiten. Product information guide
Auch für Epson ActionTower 3000 Computer: Benutzerhandbuch (34 seiten), Benutzerhandbuch (38 seiten), Austausch von Patronen (2 seiten), Produktinformation Handbuch (11 seiten), Handbuch zur Schnelleinrichtung (4 seiten)

Diagnosing CD-ROM Drive Problems

If you see an error message when you try to access your

CD-ROM drive, try the following:

If you see the error message Drive not ready, you may

have tried to access the CD too quickly; wait 10 seconds

after loading the CD in the drive before you access it. (If

you still see Drive not ready, select Retry.)

Check that the CD-ROM drive cables (data and audio) are

securely connected to the drive and to the sound card.

(Loose or defective cables will also produce no CD audio.)

See your computer User's Guide for instructions on

removing the computer's cover to access the drive cables.

If you still see the error message when you try to access the

drive, restore your original system files as described on

page 23.

If you see an error message concerning your CD-ROM or

sound card drivers, you can check to see if the drivers were

loaded properly by watching the messages your computer

displays when you turn on or reset your computer. You

should see no errors when it loads IDECDROM.SYS,

MSCDEX.EXE, or MZTINIT.SYS.

If you see an error message indicating insufficient memory,

you may need to load the CD-ROM and sound card drivers

into a high memory area. Use the MS-DOS MemMaker

utility to move the CD-ROM driver IDECDROM.SYS and

the sound card driver MZTINIT.SYS from conventional

memory to high memory. See your MS-DOS manual (or

on-line help) for instructions.

Read This First

2 5