Crown DSi 2000 Spezifikationen - Seite 2

Blättern Sie online oder laden Sie pdf Spezifikationen für Verstärken Crown DSi 2000 herunter. Crown DSi 2000 2 Seiten. Crown dsi 2000: specifications
Auch für Crown DSi 2000: Architektonische und technische Spezifikationen (1 seiten), Ergänzendes Handbuch (1 seiten), Spezifikationen (2 seiten), Spezifikation (2 seiten), Spezifikationen (1 seiten), Spezifikationen (1 seiten), Spezifikationen (1 seiten)

Seite drucken

DSi 1000, 2000, 4000 back panel

AC Line Current (120VAC ampliﬁ er playing 1/8

power pink noise into 4 ohms per ch):

DSi 1000: 6.8A, DSi 2000: 8.3A, DSi 4000:

10.5A; at idle draws no more than 38 watts.

DSi 6000: 15.3A; at idle draws no more than

180 watts.

Operating Temperature: 0° C to 40° C at 95%

relative humidity (non-condensing).

DSP Section

Input EQ: 6 parametric ﬁ lters per channel with

adjustable Q, ±15 dB boost/cut. Also adjustable

high and low shelving ﬁ lters. This 8-ﬁ lter EQ

section can be bypassed.

Crossover Filters: Highpass and lowpass per

channel. Butterworth 6/12/18/24 dB per oc-

tave, Linkwitz-Riley 24/48 dB per octave. Also

includes ±15 dB bandpass gain and polarity

control.

Output EQ: 8 parametric ﬁ lters per channel with

adjustable Q, ±15 dB boost/cut. This 8-ﬁ lter

EQ section can NOT be bypassed. Filters are

enabled individually.

Output Limiter: Prevents clipping and protects

loudspeakers. Choice of –3, –6, or –12 dB

threshold per channel.

Delay: Up to 50 msec total delay per channel.

Presets: 20 presets. One is "DSP OFF." Fifteen

are factory-set for JBL Cinema systems. Four

are user-deﬁ nable.

Front Panel Controls and Indicators

Level: Detented rotary level control, one per

channel.

Crown's Three-Year, No-Fault, Fully Transferable Warranty

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown ampli-

ﬁ er—an unsurpassed industry standard. With this unprecedented No-Fault protection, your new

Crown ampliﬁ er is warranted to meet or exceed original speciﬁ cations for the ﬁ rst three years of

ownership. During this time, if your ampliﬁ er fails, or does not perform to original speciﬁ cations,

it will be repaired or replaced at our expense. About the only things not covered by this warranty

are those losses normally covered by insurance and those caused by intentional abuse. And the

coverage is transferable, should you sell your ampliﬁ er.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside

of the USA, please contact your authorized Crown distributor for warranty information or call

574-294-8200.

DSi 6000 back panel

Power Switch: On/off switch applies AC power

to the ampliﬁ er.

Sel/Prev/Next Buttons: Three buttons near the

LCD screen are used to access menu items and

front panel lockout.

LCD Screen: Backlit liquid crystal display

shows speaker presets and signal processing.

Signal Indicator: Green LED, one per chan-

nel, illuminates when a very low-level signal is

present at input.

–10 Indicator: Green LED ﬂ ashes when output

signal exceeds –10 dB below clip.

–20 Indicator: Green LED ﬂ ashes when output

signal level exceeds –20 dB below clip.

Ready Indicator: Green LED, one per chan-

nel, illuminates when the ampliﬁ er is ready to

produce audio.

Clip Indicator: Red LED, one per channel, turns

on at the threshold of audible distortion.

Temp Indicator: Red LED, one per channel, illu-

minates under excessive temperature conditions.

Power Indicator: Blue LED illuminates when the

ampliﬁ er has been turned on and has power.

Rear Panel Controls and Connectors

AC Line Connector:

DSi 1K, 2K, 4K: NEMA 5-15P (15A).

DSi 6000: NEMA 6-10P (20A)

IEC C20 (20A).

Input Connector: Two 3-pin removable Phoe-

nix-type connectors each accept a balanced

line-level input signal.

DSi Series

Output Connectors: 4-position barrier strip

with connectors for dual louspeakers or bridge-

mono loudspeaker.

HiQnet USB Connector: Type B, connects to a

HiQnet network.

HD-15 Connector: For cinema I/O compatibility

with DSi-8M System Monitor. See Figure 1.

Protection

DSi-Series ampliﬁ ers are protected against

shorted, open or mismatched loads; overloaded

power supplies; excessive temperature; chain

destruction phenomena; excessive output

current, and input overload damage. They also

protect loudspeakers from input/output DC,

large or dangerous DC offsets and turn-on/

turn-off transients

Construction

Chassis: Steel.

Cooling: Proportional speed fan with front-to-

rear airﬂ ow.

Dimensions: EIA Standard 19-in. rack mount

width (EIA RS-310-B), 3.5 in. (8.9 cm) high and

12.25 in. (31.11 cm) deep behind mounting

surface. DSi 6000 is 16.2 in. (41.15 cm) deep.

Net Weight:

DSi 1K. 2K, 4K: 19 lb (8.6 kg).

DSi 6K: 24 lb (10.9 kg).

Shipping Weight:

DSi 1K, 2K, 4K: 22 lb (10.0 kg).

DSi 6K: 30 lb (13.6 kg).

Crown International

1718 W. Mishawaka Rd.

Elkhart, IN 46517-9439

TEL:574-294-8200

FAX: 574-294-8FAX

www.crownaudio.com

Speciﬁ cations subject to change without prior notice. Latest

information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown

International. Other trademarks are the property of their re-

, Inc. Printed in U.S.A.

3/09

139622-3