Motorola KEM-PK34301-03 Talkabout Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zwei-Wege-Radio Motorola KEM-PK34301-03 Talkabout herunter. Motorola KEM-PK34301-03 Talkabout 4 Seiten. Mt series

Seite drucken

Selecting the Interference Eliminator Code

2. Press

Interference Eliminator Codes help minimize interference by blocking

Push to Talk

through the Q

transmissions from unknown sources. Your radio has 121 Interference

(Low)

Eliminator Codes. Codes 1 – 38 are the standard analog codes that

3. Press

appear on other FRS/GMRS radios. Codes 39 – 121 are additional digital

Note: If you skip step 2, the beginning of your message may not be

codes added for superior interference protection. 0 is the off position,

heard on the receiving radio. For a 30-second period, starting after

Call Tone

no analog or digital codes are enabled.

the last transmission, all transmissions received on the selected

To set the code for a channel:

channel and code will pass through the Q

Flash Light

1. Press

until the code starts to flash.

VibraCall

Button

VibraCall

2. Press

to select the code.

receiving a message. This is useful in noisy environments. When the

3. Press

to save the code setting or

to continue set up.

alert is on, the radio vibrates once every 30 seconds when you receive a

You can set a different code for each channel using this procedure. An

message on the channel and code you set.

extended press of

allows you to scroll through the Interference

Scroll/Weather

1. To turn vibrating alerts on, press

Code rapidly so you can quickly reach the code you want.

current setting will flash.

Note: You must set the Interference Eliminator Code to 0 on a radio that

Microphone

2. Press

uses Interference Eliminator Codes to communicate with radios that do

not have Interference Eliminator Codes. Select 0 for "no tone, no code"

Mini-USB

3. Press

and OFF will flash on your radio's display.

Charging Port

Keypad Tones

Setting and Transmitting Call Tones

You may enable or disable the speaker key tones. You will hear the key

Your radio can transmit different call tones to other radios in your group

tone each time a button is pushed.

so you can alert them that you want to talk. Your radio has 20 call tones

1. Press

from which to choose.

2. Press either

To set a call tone:

1. Press

three times until the current call tone setting flashes and

3. Press

appears.

Note: When the key tone feature is off, the following are not disabled:

2. Press

to change and hear the call tone.

•

Transmit timeout alert tone

•

Call tone

3. Press

to set the new call tone or

to continue set up.

•

Low battery alert tone or

To transmit your call tone to other radios set to the same channel and

•

The transmitted talk confirmation tone

Interference Eliminator Code as your radio, press

Transmitting a Talk Confirmation Tone

Note: Setting the call to 0 disables the call tone feature.

You can set your radio to transmit a unique tone when you finish

transmitting. It is like saying "Roger" or "Over" to let others know you

Hands-Free Use Without Accessories (

)

are finished talking.

You can use the iVOX feature to transmit hands-free without the need for

any headset accessories. Once iVOX is turned on, the radio detects your

1. With the radio on, press

voice and transmits when you speak into the internal microphone.

On/Off flashes.

1. Press

until

appears on the display. The current setting

2. Press

On/Off will flash.

3. Press

2. Press

to select On or Off.

Dual Watch Scan

This feature allows you to monitor two channels at the same time.

3. Press

to set or

to continue set up.

1. Press the

Hands-Free Use With Accessories (

)

2. Press the

You can transmit hands-free more reliably with the use of optional

Watch reception. (if you want to disable the Dual Watch function, set

headset accessories. Once VOX is turned on, the radio detects your

it to 'OFF').

voice and transmits when you speak.

3. Press

Many accessories (sold separately) are available for your radio. For

When the Dual Watch feature is activated, the radio will switch

more information, visit our Web site at motorolasolutions.com/talkabout

sequentially between the primary and the Dual Watch channels.

or shop.giantintl.com.

The active channel will display for five (5) seconds after any activity has

1. Turn the radio off and plug the VOX accessory into the accessory port.

ended on the dual channel. You may talk on the Dual Watch channel

2. Turn the radio on. VOX shows on the display.

during this period.

3. Adjust the volume appropriately by rotating

. Lower the volume

before placing the accessory on your head or in your ear.

4. To turn off, simply remove accessory.

Emergency Alert Mode

Note: There is a short delay between the time you start talking and

The Emergency Alert feature can be used to signal members in your

when the radio transmits. There is a short delay before the transmission

group of your need for urgent help. MT series radios will operate in an

is completed.

automatic "hands-free" emergency control mode for a total of 30

seconds after activating the Emergency Alert. MT series radios in your

Setting the Sensitivity Level When in

Mode

group will automatically advance the speaker volume to the maximum

Adjusting the radio's sensitivity level helps minimize the possibility of

setting and sound a warbling alert tone for 8 seconds. The alert tone is

unintended noises triggering a transmission and helps the radio pick up

emitted from your own radio speaker and the receiving radios in your

soft voices.

group. After the 8 second alert, any spoken words or incidental sounds at

your end will be transmitted to the group for 22 seconds. For the 30

1. Press

until VOX and the level setting (1 - 3) appear on the

second duration of Emergency Alert mode, MT series radio controls and

display.

buttons will be locked to maximize reception of the emergency message.

2. Press

to select the sensitivity level.

1. Press and hold the Emergency Alert button for 3 seconds.

3. Press

to set or

to continue set up.

2. Release the button after the LED Indicator glows red and the alert tone

begins to sound. There is no need to continue to hold the Emergency

3 = High Sensitivity for quiet environments

Alert button or use PTT for your message to be transmitted.

2 = Medium Sensitivity for most environments

3. After the alert tone ends you may speak into the microphone. Your

1 = Low Sensitivity for noisy environments

voice or incidental sounds will be transmitted. The LED indicator will

continue to glow for the duration of the 22 second period.

Note: When you connect a headset, the radio is automatically set to the

4. After 30 seconds your radio speaker will emit a Talk Confirmation

last chosen sensitivity level.

Tone and the LED Indicator will extinguish. Operation then returns to

Noise Filtering

normal two-way mode.

The Q

noise-filtering feature helps to ensure uninterrupted

Note: All Motorola Talkabout EM, MJ, MR, and MT series radios are fully

communication with other Motorola radios that have this feature.

compatible with the Emergency Alert feature. Radios other than EM, MJ,

This feature also filters out unwanted transmissions from other

MR, and MT series can receive the emergency alert signal, but will not

radios. This is useful in places where there is heavy radio traffic,

respond with adjusted volume settings, locked controls, or a warbling

alert tone. Users of other radio models set to the same channel and

such as amusement parks or ski resorts.

Interference Eliminator Code will hear a steady tone for 8 seconds

Note: Q

noise filtering is not available when the radio is scanning.

followed by the voice transmission for 22 seconds.

Warning: The Emergency Alert feature should only be used in the event

To turn Q

noise filtering on or off:

1. Press

until

displays. The current setting On/Off will flash.

of an actual emergency. Motorola is not responsible if there is no

response to the emergency alert from the receiving group.

2. Press

to turn noise filtering On or Off.

Built-in Flashlight

3. Press

to confirm your selection or

to continue set up.

Press and hold the flashlight button to turn and keep the light on. The

To transmit to a radio that has Q

noise filtering turned on:

switch functions as a momentary control for the light.

1. Select the same channel and Interference Eliminator Code as

Note: Turn off the flashlight when not in use to conserve battery power.

the other radio.

Accessory Port

Keypad Lock

to send a call tone. This allows your voice to pass

To avoid accidentally changing your radio settings:

noise filter on the receiving radio.

1. Press and hold

and speak normally.

2. When in lock mode, you can turn the radio on and off, adjust the

volume, receive, transmit, send a call tone, and monitor channels. All

Menu/ Keypad Lock

other functions are locked.

To unlock the radio, press and hold

noise filter.

Scan/Monitor

MON

Scanning Channels

Alert

Use scan to search the 22 channels for transmissions from unknown

is a vibrating alert that notifies you that your radio is

parties, to find someone in your group who has accidentally changed

channels, or to quickly find unused channels for your own use.

There is a priority feature and 2 modes of scanning ( basic and

advanced ) to make your search more effective. The basic scan mode

until

is displayed. The

uses the channel and code combinations for each of the 22 channels as

you have set them ( or with the default code value of 1). The "Advanced

Scan" mode will scan all channels for any and all codes, detect any

to change the setting to On/Off.

code in use, and use that code value temporarily for that channel.

to set or

to continue set up.

Priority is given to the "home channel," that is, the channel (and

Speaker

Interference Eliminator Code) your radio is set to when you start the scan.

This means the initial channel (and code setting) is scanned more often

than the other 21 channels, and your radio will respond quickly to any

activity occurring on the home channel as a priority.

until

appears. The current setting On/Off will flash.

To start Scanning:

1. Briefly press the

to turn On or Off.

radio will begin to scroll through the channel and code combinations.

to confirm or

to continue set up.

2. When the radio detects channel activity matching the channel and

code combination, it stops scrolling and you can hear the

transmission.

Flash Light LED

3. To respond and talk to the person transmitting, press

seconds after the end of the transmission.

4. The radio will resume scrolling through the channels five seconds

after the end of any received activity.

Numbers for Channel,

5. To stop scanning, briefly press the

Call Tone

To start Advanced Scanning:

1. Set the Interference Eliminator Code to "zero" or OFF.

until the

appears. The current setting

Numbers for Codes

2. Briefly press the

the radio will begin to scroll through the channels. No Interference

to turn On or Off.

Eliminator Codes will filter what is heard.

to set or

to quit menu mode.

—Battery Meter

3. When the radio detects channel activity with ANY code (or NO

—Vibrate

code), it stops scrolling and you can hear the transmission. Any

—Scan

—Channel Power

Interference Eliminator Code that may be in use by that party will be

Indicator

—Dual Scan

detected and displayed.

button until the Dual Channel Scan icon

displays.

(see menu Options)

4. To respond and talk to the person transmitting, press

buttons to select the second channel for Dual

—Call Tone,

seconds of the end of the transmission. The radio will transmit using

Keypad Tone

—Keypad Lock

the newly detected Interference Eliminator Code.

—Weather Alert

—Talk Conﬁrmation

5. The radio will resume scrolling through the channels five seconds

or the PTT button to confirm the channel selection.

Tone (Roger Beep)

after the end of any received activity.

—Hands-Free Use

Without

6. To stop scanning, briefly press the

—Noise Filtering

Accessories

Scanning Notes:

1. If you press

while the radio is scrolling through inactive

—On/Off for each

—Hands-Free Use

feature

channels, the transmission will be on the "home channel". Scanning

With Accessories

will resume five seconds after the end of your transmission. You may

press the

key to stop scanning at any time.

Special Features

2. If the radio stops on an undesired transmission, you may immediately

resume the scan by briefly pressing

3. If the radio repeatedly stops on an undesired transmission, you may

temporarily remove that channel from the scan list by pressing and

holding

for three seconds. You may remove more than one

channel in this way.

4. To restore the removed channel(s) to the scan list, turn the radio off

and then back on, or exit and re-enter the scanning mode by

pressing

5. You cannot remove the home channel from the scan list.

6. In Advanced Scan, the detected code will only be used for one

transmission. You must note the code, exit scan, and set that

detected code on that channel to permanently use the detected code.

This feature is not available in Latin America

Your radio can tune in to broadcasts by the United States National Oceanic

and Atmospheric Administration (NOAA) Weather Radio and Environment

Canada Weatheradio.

You can listen to a weather channel (see "Weather Channels and

Frequencies" table below) or set your radio to alert you to emergency

weather broadcasts that interrupt routine broadcasts. When you listen to a

weather channel, you cannot use your radio in scan mode or for two-way

communications.

Both NOAA and Environment Canada have transmitters located throughout

the United States and Canada, respectively. These transmitters broadcast

watches, forecasts, and other information 24 hours a day.

Note: NOAA weather radio stations are assigned to cover specific areas

and service may be limited. Please check with your local weather office for

frequency and details, or visit www.weather.gov/nwr in the US or

www.msc.ec.gc.ca/msb/weatheradio in Canada to view the appropriate

transmitter for your area.

The use of the NOAA logo does not provide an endorsement or implied

endorsement by NOAA's National Weather Service, nor does the use of the

Weatheradio logo provide an endorsement or implied endorsement by

Environment Canada.

Turning Weather Channel Reception On and Off

1. To turn weather reception on, press

2. To turn off, press

or turn the radio off and then back on.

until

displays.

Setting the Weather Channel

Your radio receives weather frequencies:

1. After turning weather reception on, press

channel flashes.

until

is no longer displayed.

2. Press

to select the appropriate channel with good

reception in your area.

3. Press

to save the weather channel setting.

Setting the Weather Alert

Your radio can be set to respond to NOAA Weather Radio emergency

messages. A special alarm tone sounds an alert and turns on the

weather receiver to give you immediate weather and emergency

information.

1. After turning weather reception on, press

2. Press

to select On/Off. If you activate Weather Alert and

return to two-way mode,

will display.

3. Press

to save the Weather Alert setting.

4. Press

to return to two-way mode.

As with two-way radio reception, weather channel reception depends on

key. The scan

will appear in the display, and the

how close you are to a transmitter and whether you are indoors or

outdoors. Because weather channels are transmitted without codes, they

may contain static or noise. Weather Alert will not function while actively

transmitting or receiving in two-way mode.

Scanning for Weather Channel

within five

The radio can scan for an active NOAA transmission automatically.

1. After turning weather reception on, briefly press the

2. The scan icon

will appear in the display, and the channel will

scroll through the NOAA channels 1-7.

key.

3. When the radio detects channel activity, it stops scanning and you

can hear the transmission.

4. You may resume the scan by briefly pressing

key. The scan

will appear in the display, and

5. To stop scanning, briefly press the

disappear.

Weather Channels and Frequencies

Weather

Frequency

Channel

within five

WX1

162.550 MHz

WX2

162.400 MHz

WX3

162.475 MHz

key.

WX4

162.425 MHz

WX5

162.450 MHz

WX6

162.500 MHz

Weather Receiver

Call Tone

Flash Light

Scan/Monitor

MON

Button

Scroll/Weather

Warranty

and hold for 3 seconds.

Microphone

Mini-USB

Consumer Two-Way Radio Products and Accessories purchased in

Speaker

Charging Port

Uruguay, Panama and the United States.

. The current

What Does this Warranty Cover?

Flash Light LED

Subject to the exclusions contained to the right, Giant International

Ltd. warrants the Motorola branded consumer two-way radios that

operate via Family Radio Service or General Mobile Radio Service

that it manufactures ("Products"), the Motorola branded or certified

accessories sold for use with these Products that it manufactures

("Accessories") to be free from defects in materials and

workmanship under normal consumer usage for the period(s)

outlined below. This limited warranty is a consumer's exclusive

remedy, and applies as follows to new Motorola branded Products

and Accessories manufactured by Giant International Ltd., and

twice. On/Off displays.

purchased by consumers in Uruguay, Panama and the United

States, which are accompanied by this written warranty:

Who is covered?

Numbers for Channel,

Call Tone

This warranty extends only to the first consumer purchaser, and is

not transferable.

What will GIANT INTERNATIONAL LTD. do?

Numbers for Codes

GIANT INTERNATIONAL LTD., at its option, will at no charge repair,

replace or refund the purchase price of any Products or

Accessories that does not conform to this warranty. We may use

—Battery Meter

—Vibrate

functionally equivalent reconditioned/ refurbished/ pre-owned or

new Products, Accessories or parts.

—Scan

—Channel Power

Indicator

—Dual Scan

key.

(see menu Options)

Products Covered

Length of Coverage

—Call Tone,

Products and Accessories as

—Keypad Lock

One ( 1) year from the date of

Keypad Tone

defined above, unless

purchase by the first consumer

—Weather Alert

—Talk Conﬁrmation

otherwise provided for below.

purchaser of the product unless

Tone (Roger Beep)

otherwise provided for below.

—Hands-Free Use

Without

—Noise Filtering

1. Consumer Two-Way Radio

1. Ninety ( 90) days from the

Accessories

key. The scan icon

will

Accessories.

date of purchase by the first

—On/Off for each

—Hands-Free Use

consumer purchaser of the

feature

With Accessories

product.

2. Products and Accessories

2. The balance of the original

that are Repaired or

warranty or for ninety ( 90)

Weather

Frequency

Replaced.

days from the date returned

Channel

to the consumer, whichever

WX7

162.525 MHz

is longer.

WX8

161.650 MHz

WX9

161.775 MHz

WX10

161.750 MHz

WX11

162.000 MHz

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

USA Two-Way Radios

1-800-638-5119

[email protected]

Uruguay Two-Way Radios

Panama Two-Way Radios

00-04-01-78-70-11

507-340-0293

Patent and Copyright Information

Manufactured, distributed or sold by Giant International Ltd., official

licensee for this product. MOTOROLA, MOTOROLA SOLUTIONS and

the Stylized M Logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under license. All

other trademarks are the property of their respective owners.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE

DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,

REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS

LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE

CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL

MOTOROLA SOLUTIONS, INC. OR GIANT INTERNATIONAL LTD. BE

LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING

NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE

OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,

INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY

KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,

LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT

OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE

THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE

DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or

exclusion of incidental or consequential damages, or limitation on

the length of an implied warranty, so the above limitations or

exclusions may not apply to you. This warranty gives you specific

legal rights, and you may also have other rights that vary from state

to state or from one jurisdiction to another.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and

replacement of parts due to normal wear and tear are excluded

from coverage.

Batteries. Only batteries whose fully charged capacity falls below

80% of their rated capacity and batteries that leak are covered by

this limited warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper

operation, storage, misuse or abuse, accident or neglect, such as

physical damage (cracks, scratches, etc.) to the surface of the product

resulting from misuse; (b) contact with liquid, water, rain, extreme

humidity, heavy perspiration, when the battery door or accessory port

seals are not closed, sand, dirt or the like, extreme heat, or food; (c)

use of the Products or Accessories for commercial purposes or

subjecting the Product or Accessory to abnormal usage or conditions;

or (d) other acts which are not the fault of Motorola Solutions, Inc. or

Giant International Ltd., are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects

or damage that result from the use of Non-Motorola branded or

certified Products or Accessories or other peripheral equipment

are excluded from coverage.

Unauthorized Service or Modification. Defects or damages

resulting from service, testing, adjustment, installation,

maintenance, alteration, or modification in any way by someone

other than Motorola Solutions, Inc, Giant International Ltd. or its

authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers

or date tags that have been removed, altered or obliterated; (b)

broken seals or that show evidence of tampering; (c) mismatched

board serial numbers; or (d) nonconforming or non-Motorola

branded housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of

Products or Accessories due to any communication service or

signal you may subscribe to or use with the Products or

Accessories is excluded from coverage.

For Accessories, please call the telephone number designated

above for the product with which they are used.

You will receive instructions on how to ship the Products or

Accessories at your expense, to a GIANT INTERNATIONAL LTD.

Authorized Repair Center. To obtain service, you must include: (a) a

copy of your receipt, bill of sale or other comparable proof of

purchase; (b) a written description of the problem; (c) the name of

your service provider, if applicable; (d) the name and location of the

installation facility (if applicable) and, most importantly; (e) your

address and telephone number.

MT Series