Epson Equity 320SX PLUS Produktinformation Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Produktinformation Handbuch für Desktop Epson Equity 320SX PLUS herunter. Epson Equity 320SX PLUS 7 Seiten. Product support bulletin(s)
Auch für Epson Equity 320SX PLUS: Produkt-Support-Bulletin (4 seiten)
Seite drucken
Hard Disk Drive Types
The following table lists the types of hard disk drives you can
use in your computer. Check this table and the documentation
supplied with your hard disk to find the correct number for the
type of hard disk drive(s) installed in your computer. You need
to enter this number when you set the hard disk drive
configuration in the SETUP program
Hard disk drive types
Equity Series Computers
Installation/Support Tips
Mouse and Keyboard
When attaching the mouse and keyboard connectors, be
careful to attach them to the proper c onnectors. Although
they are physically identical, they are not interchangeable.
Installing Floppy Disk Drives
When installing a floppy disk drive as drive B, remember
to set the drive select jumper to the second position and
attach the pass-through connector on the floppy drive
controller cable to the drive, not to the end connector.
If the drive does not function normally, make sure that the
drive type has been correctly selected in SETUP. Also
check that any special drivers that may be necessary have
been installed correctly.
Installing Hard Disk Drives
It is recommended that a Xi-bit, AT-type hard disk
controller be used in the Equity 320s~ PLUS if you are
installing a drive that cannot use the internal hard disk
controller. Also remember to disable the onboard hard
diik controller when installing such a drive.
If you are having difficulty in formatting the hard disk
drive, try starting over with the Format option in
diagnostics.
Setup
When installing a hard disk drive, be sure to consult the
drive type tables for the type which fits the drive you are
installing. If there is no match for your drive, use the User
Definedoption.
Adding Memory Modules
The total amount of memory must be one of the following:
fast-page mode and have an access speed of Wns or faster.
Software Problems
When installing a copy-prote&d software package on the
Equity 320s~ PLUS, first try the installation at 20MHz. If
this does not work properly, try switching to 1OMHz for
the installation. If you are still unable to load the program
at 2OMH2, try loading at 1OMHz and then switching to
When using a software package that uses a keydisk as its
copy-protection method, try loading it at 2OMHz. If this
does not work, enable the Auto Speed option in SETUP.
Power-on Password
If you set a power-on password, make sure you do not
forget it. If you do, it will be necessary to disable it by
moving jumper J2 on the main circuit board to the
A position
EQUITY 320sx PLUS
320sx PLUS-5