Motorola BLINK1-R Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Babyphone Motorola BLINK1-R herunter. Motorola BLINK1-R 26 Seiten. Wi-fi video baby monitor camera

Seite drucken

Tap Cameras to return to the Camera list.

Tap on

to add another camera to the list.

•

Tap on Edit:

•

Tap Remove to take a camera off the list.

Tap Rename to give a camera a new name.

•

Tap Alert Settings to receive notifications if a noise is

detected or the temperature in your baby's room is too high

or too low.

•

If you use Alert Settings, under Settings on your iPhone

iPad

, select Notifications > Baby Cam > Notification Center

ON.

•

Select your preferred Alert Style and return to the application

and tap Done.

•

Tap Cancel to return to the camera list.

•

Tap on Account to change the password.

Tap on Logout to leave the account.

•

Adding another Camera: Working with iPhone

BLINK1_USA_V3_2013_04_18.indd 30-31

4.7 Adding another Camera:

Working with iPhone

Follow the same steps as under 3.3 User Account and

Camera Setup, Working with iPhone

5. Procedure for resetting the Camera

Note: If your camera is moved from one router (e.g. home) to

another router (e.g. office) or you have camera setup issues,

then this camera must be reset again, and then the camera set

up again for devices for Android

1. Switch the ON/OFF switch to ON.

2. Press and hold the RESET button on the underside of

the camera for 5 seconds, until you hear a beep sound.

3. Release the RESET button and wait for the camera to

complete the internal reset procedure.

4. After about 60 seconds you will hear two short beeps and

the green LED starts blinking.

•

Please be patient, it may take a few minutes until your camera

appears in your Wi-Fi

/iPad

Procedure for resetting the Camera

/iPad

or iPhone

/iPad

devices list, or is added to your account.

18/4/13 2:09 PM