Motorola B803 Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schnurloses Telefon Motorola B803 herunter. Motorola B803 47 Seiten. Dect 6.0 cordless answering system with bluetooth wireless technology
Auch für Motorola B803: Schnellstart-Handbuch (8 seiten)

Seite drucken

PHONEBOOK

The directory is stored in the telephone base, and is shared by all handsets. Changes made to

the directory on any one handset will apply to all.

NOTE

Only one handset can review the directory at a time. If another handset attempts to enter the

directory, the screen will display NOT AVAILABLE AT THIS TIME.

The directory can store up to

(including spaces) for the names and 30 digits for the telephone numbers. A convenient search

feature can help you find and dial numbers quickly. If there are already

will display LIST FULL. You will not be able to store a new number until an existing one is

deleted.

4.1

View an Entry

1. Press DIR when in idle mode to display the first entry in the directory. DIRECTORY EMPTY

will be displayed if there are no directory entries.

You can also display the first entry in the directory by pressing MENU/SELECT twice, then

pressing MENU/SELECT again to choose >REVIEW.

2. Press DIR / CID to browse through the directory. Entries will be displayed alphabetically by the

first letter in the name.

4.2

Add an Entry

1. Press MENU/SELECT when in idle mode to enter the feature menu.

2. Press MENU/SELECT again to enter >DIRECTORY menu.

3. Press DIR or CID to select STORE.

4. Press MENU/SELECT.

5. Enter the telephone number when prompted.

• Use the dial pad to enter up to 30 digits.

– Press DIR / CID to move the cursor to the right or left.

– Press DELETE/MUTE to erase digits.

– Press and hold DELETE/MUTE to erase all digits.

– Press and hold REDIAL/PAUSE to enter a three-second dialing pause.

• Copy a number from redial by pressing REDIAL/PAUSE then press DIR or CID, or pressing

REDIAL/PAUSE repeatedly to locate the number to copy. Press MENU/ SELECT to copy the

number.

6. Press MENU/SELECT to save the number in the display. The display will show ALREADY

SAVED if the number is already in the directory. The same number cannot be saved twice.

7. Enter the name when prompted.

• Use the dial pad to enter a name (up to 15 characters). Each time a key is pressed, the

character on that key will be displayed. Additional key presses will produce other characters on

that key. Please refer to the character map in section 2 before.

– Press DIR or CID to move the cursor to the right or left.

– Press DELETE/MUTE to erase letters.

– Press and hold DELETE/MUTE to erase all letters.

8. Press MENU/SELECT to store your new directory entry. The name and the telephone number

will then be shown on the screen.

NOTE

The first letter of every word will be capitalized. The remaining letters in a word begin with lower

case letters shown in the chart to the right.

4.3

Edit an Entry

100

entries, with a maximum of 15 alphanumeric characters

100

entries, the screen