Motorola C1001LA Benutzerhandbuch - Seite 30

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schnurloses Telefon Motorola C1001LA herunter. Motorola C1001LA 42 Seiten.

Seite drucken
Motorola C1001LA Benutzerhandbuch
9.4

Recall mode

Depending on your country and network operator, your C1LA has the recall time set as
m
600 ms (TIMED BR,4). It is unlikely that you will need to change this setting unless advised
to do so.
1. Press
, scroll
d
2. Scroll
to
RECALL TIME
u
d
3. Press
or
to select recall you require and press
9.5

Dial mode

m
Your C1LA is set to tone dialling. You should only need to change this if connected to an
older type of switchboard / PBX which requires pulse dialling.
, scroll
1. Press
d
2. Scroll
to
DIAL MODE
u
d
3. Press
or
to select
9.6

Change base PIN code

Some functions are protected by a 4 digit PIN code which must be entered if you want to
change the settings. The default PIN is 0000. You can change this to your own preferred
number.
m
When you enter a PIN, the digits are shown as ****.
1. Press
, scroll
d
2. Scroll
to
CHANGE PIN
3. The display shows
4. The display shows CONFIRM. Re-enter the new PIN and press
IMPORTANT
If you change the PIN code, please keep a record of the new number.
You can register up to five handsets to your C1LA base to extend your phone system
without having to install extension sockets for each new phone.
Each C1LA handset can be registered with up to four bases. You can then select the base
you prefer to use. If you have purchased a C1LA multiple pack, all additional handsets
come pre-registered to the base.
If you have purchased an additional handset separately, you must register it to your C1LA
base before it can be used.
30
m
d
to
ADVANCED SET
and press
m
d
to
ADVANCED SET
and press
TONE
or
PULSE
m
d
to
ADVANCED SET
and press
NEW -- -- -- --
, enter the new 4 digit PIN code and press
m
and press
.
m
.
to confirm.
m
and press
.
m
.
and press
to confirm.
m
and press
.
.
m
m
.
to confirm.
Base settings