Motorola C1001LBI Erste Schritte

Blättern Sie online oder laden Sie pdf Erste Schritte für Schnurloses Telefon Motorola C1001LBI herunter. Motorola C1001LBI 2 Seiten. C1lbi series

Seite drucken
Digital Cordless Telephone
Motorola C1LBI
For C1001LBI, C1002LBI, C1003LBI and C1004LBI
Warning: Charge the handset for 24 hours before use.
1. Getting started
IMPORTANT
Do not place your C1LBI in the bathroom or other humid areas.
Location
You need to place your C1LBI base within 2 metres of the mains power and from the telephone
wall socket so that the cables will reach. The socket-outlet should be installed near the equipment
and should be easily accessible.
Make sure that it is at least 1 metre away from other electrical appliances to avoid interference.
Your C1LBI works by sending radio signals between the handset and base. The strength of the
signal depends on where you place the base. Placing it as high as possible ensures the best
signal.
HANDSET RANGE
The unit has a range of up to 300 metres outdoors when there is a clear line of sight between
the base and handset. Any obstruction between the base and handset will reduce the range
significantly. With the base indoors and the handset either indoors or outdoors, the range will
normally be up to 50 metres. Thick concrete and stone walls can severely affect the range.
SIGNAL STRENGTH
The
icon on your handset indicates that you are within range of the base. When out of range
of the base, the
icon flashes. If you are on a call, you will hear a warning beep.
The line will hang up if the handset moves out of range of the base. Move closer to the base. The
handset will automatically reconnect to the base.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Do not connect the
telephone line cord into the wall socket until the handset is fully charged. Use only the power
adaptor and telephone line cord supplied with the product.
Connecting the base
1. Plug the telephone line cord into the socket marked
on the underside of the base.
2. Plug the power adaptor into the socket marked
on the underside of the base and plug the
other end into the mains power wall socket. Switch on the mains power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the rechargeable Ni-MH
battery cells supplied. Please note the '+' and '-' markings inside the battery compartment
and insert in the correct direction.
2. Slide the battery cover back into place.
Handset LCD Display
Battery
status
Scrolls
when
charging
Time or Handset name
In standby mode, press and hold to switch handset
0
idle screen between handset name or time.
Flashes to indicate an incoming external call.
External call in progress.
Flashes to indicate an incoming internal call.
Internal call in progress.
3-way call in progress or transfer an external call to another C1LD handset registered to the
base.
Flashes to indicate new voicemail messages received. Off when you have no voicemail
1
messages.
Indicates signal strength.
Flashes when handset is not registered to the base or if you go out of range.
Menu is opened.
Phonebook is opened.
Flashes to indicate new calls list entries received.
2
Answered call (when viewing the Calls list).
2
Unanswered call (when viewing the Calls list).
2
Keypad is locked.
Displayed number is longer than 12 digits.
The approximate power levels of your battery are indicated as follows:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Flashes when battery is almost fully discharged.
1
This feature is dependent on your Network Service provider supporting the service. A
subscription fee may be payable.
2
For this feature to work, you must subscribe to Caller ID Service from your network operator. A
subscription fee may be payable.
NOTE
If the caller's number exactly matches an entry stored in the phonebook, the name is displayed.
Press
to see the caller's number.
3.6.2
Copy a Redial list number to the phonebook
1. Press
to open the Redial list.
m
u
d
2. Scroll
or
to the entry you want.
m
3. Press
. The display shows
ADD
?.
m
4. Press
again. The display shows NAME.
m
5. Enter the name and press
. The number is displayed.
m
6. Edit the number if necessary, then press
.
u
d
7. Press
or
to select the ringer melody you want and press
. The number is stored.
3.6.3
Delete an entry
1. Press
to open the Redial list.
u
d
2. Scroll
or
to the entry you want and press
. The display shows
DELETE
If the number is a match to a phonebook entry and the name is displayed, press
m
display the number and then press
and the display will show
DELETE
?.
3. Press
to confirm or
to cancel.
3.6.4
Delete the entire Redial list
1. Press
to open the Redial list.
m
2. Press and hold
. The display shows
DELETE ALL
?.
3. Press
to confirm or
to cancel.
3.7
Lock / unlock the keypad
You can lock the keypad so that it cannot be operated accidentally while carrying it around.
NOTE
When the keypad is locked, you can still answer incoming calls and operate the handset as
normal. When the call ends, the keypad lock comes on again.
1. Press and hold
.
icon is displayed.
2. To unlock the keypad, press any key on your handset. The display shows
PRESS
3. Press
within 5 seconds.
Manufactured, distributed or sold by Suncorp Technologies Ltd., official
licensee for this product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other trademarks are the property
of their respective owners. © 2015 Motorola Mobility LLC. All rights
reserved.
Version 1 (IN)
3. If you are charging the batteries for the first time, place the handset on the base to charge for
at least 24 hours continuously.
4. When the handset is fully charged, the
icon will appear steady on the display. Plug the
other end of the telephone line cord (make sure that one end is already plugged into the
base) into the telephone wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process for all the handsets
and chargers.
1. Plug the power adaptor into the socket marked
on the underside of the charger and plug
the other end into the mains power wall socket.
2. Remove the battery cover from the back of the handset and insert the 2 x AAA Ni-MH
rechargeable batteries supplied. Please note the '+' and '-' markings inside the battery
compartment and insert in the correct direction.
3. Slide the battery cover back into place.
4. If you are charging the batteries for the first time, place the handset on the charger to charge
for at least 24 hours continuously.
5. When the handset is fully charged, the
icon will appear steady on the display. The
display will show
HANDSET
and handset number (e.g. 2) to indicate that it is registered to the
base.
IMPORTANT
Warning! Use only the approved rechargeable Ni-MH battery cells supplied with your C1LBI.
BATTERY LOW WARNING
If the
icon flashes on the display and you hear a warning beep every minute during a call,
you will need to recharge the handset before you can use it again.
When charging, the
icon will scroll on the display.
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give up to 7 hours talk time or up to 150 hours
standby time on a single charge.
1
Note that new batteries do not reach their full capacity until they have been put to normal use for
several days.
To keep your batteries in the best condition, leave the handset off the base for a few hours at a
time.
Running the batteries right down at least once a week will help them last as long as possible.
Navigating the menus
Your C1LBI has an easy to use menu system.
Each menu has a list of options, which you can see on the menu map on the following page.
m
When the handset is switched on and in standby:
1. Press
to open the main menu.
m
u
d
2. Then use
or
buttons to scroll through the available options.
3. Press
to select an option. To return to the previous menu level, press
menu and return to standby, press
.
NOTE
If no buttons are pressed for 30 seconds, the handset returns to standby automatically.
Menu map
PHONEBOOK
HANDSET
ADD ENTRY
BEEP
MODIFY ENTRY
KEYTONE
DELETE ENTRY
LOW BATTERY
SETUP
OUT RANGE
BASE VOLUME
INT RING VOL
BASE MELODY
EXT RING VOL
DEL HANDSET
INT MELODY
PIN CODE
EXT MELODY
DIAL MODE
AUTO ANSWER
FLASH
NAME
DEFAULT
KEYLOCK ?
AREA CODE
3.8
Paging / Find handset
You can alert a handset user that they are wanted or locate a missing handset.
Paging calls cannot be answered by a handset.
1. Press
on the base. All handsets registered to the base will ring.
2. To stop the ringing, press
on the base again or press any button on the handset.
4. Phonebook
You can store up to 50 names and numbers in the phonebook. Names can be up to 16 characters
long and numbers up to 24 digits. You can also select different ringer melodies for the phonebook
entries.
4.1
Store a name and number
If the C1LBI is connected to a switchboard, you may need to enter a pause in a stored number.
This gives the switchboard time to find an outside line. A pause is normally stored after the
switchboard access code (e.g. 9).
When storing a number, press and hold
, the display shows P. You can then continue storing
?.
the phone number.
to
If you have subscribed to Caller ID Service and wish to display the name of your caller instead of
the number, save the full telephone number including the area code to your phonebook.
m
You can store multiple entries with the same number. However, to prevent unnecessary
duplicated entries, you can only store the same name once.
m
1. Press
. The display shows PHONEBOOK.
m
2. Press
. The display shows
ADD
ENTRY.
m
3. Press
. The display shows NAME.
m
4. Enter the name and press
. The display shows NUMBER.
5. Enter the number and press
. The display shows
u
d
6. Press
or
to select the ringer melody you want and press
The display shows
ADD
ENTRY.
7. Enter the next name and number entry that you wish to store in your phonebook or press
to return to standby.
.
ENTERING NAMES
8
Use the keypad letters to enter names, e.g. to store TOM:
6
Press
once to enter T.
6
Press
three times to enter O.
Press
once to enter M.
Welcome...
to your new Motorola C1LBI Digital Cordless Telephone!
•
All handsets are fully cordless for locating anywhere within range.
•
50 name and number phonebook.
•
Caller ID shows you who's calling and see details of the last 40 callers in a Calls list.
•
Bright backlit display.
•
Redial up to 10 of the last numbers called.
•
Register up to 4 handsets to a single base and register each handset with up to 4 different
bases.
•
Make internal calls and transfer external calls between handsets.
•
Choose from 5 different ringtones for internal and external calls as well as numbers stored in
the phonebook.
Please note that this equipment is not designed for making emergency telephone calls when
the power fails. Alternative arrangements should be made for access to emergency services.
Need help?
If you have any problems setting up or using your C1LBI, please contact Customer Services
on 1800 2700 361.
Alternatively, you may find the answer in the 'Help' section at the back of this guide.
1
You must subscribe to your network provider's Caller ID or Call Waiting service for these
features to work. A subscription fee may be payable.
The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the
handset less talk / standby time. Eventually they will need to be replaced.
After charging your handset for the first time, subsequent charging time is about 6–8 hours a day.
Batteries and handset may become warm during charging. This is normal.
1
All talk and standby times are approximate and depend on features selected and usage pattern.
Date and time
If you have subscribed to a Caller ID Service, the date and time is set automatically for all handsets
when you receive your first call.
If you do not have a Caller ID service, you can set the date and time manually.
m
Set the date manually:
m
d
1. Press
, scroll
to
DATE -- TIME
2. Press
to select.
3. Enter the date (e.g. 12 / 08 / 15 for 12th of August 2015) and press
m
Set the time manually:
d
1. Press
, scroll
to
DATE -- TIME
d
2. Scroll
to
CLOCK SET
and press
3. Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press
Your C1LBI is now ready for use.
Underside of the base
A Page
In standby mode, press to ring the handset(s).
Press and hold to enter registration mode when registering handsets.
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls. The call timer will display
after the first 15 seconds of your call. When the call ends, the total duration of your talk time is
shown for 5 seconds.
3.1
Switch the handset on / off
Press and hold
to switch the handset on or off.
. To exit the
3.2
Calls
T
3.2.1
Make a call
1. Press
.
2. Dial the number.
3.2.2
Preparatory dialling
T
1. Dial the number first. If you make a mistake press
DATE -- TIME
DATE SET
2. Press
to dial.
T
CLOCK SET
3.2.3
End a call
ALARM SET
Press
, or place the handset back on the base or charger.
REGISTER
3.2.4
Receive a call
SELECT BASE
When you receive an external call, the phone rings and
REG BASE
1. If the handset is off the base then press
simply lift the handset to answer the call.
T
NOTE
If you prefer to press
when you lift up the handset to answer a call, you will need to switch
Auto answer off.
3.3
Adjust the earpiece volume
u
d
During a call, press
or
to increase or decrease the volume. There are 5 levels to choose
from.
3.4
Mute
You can mute your handset so that you can talk to someone nearby without your caller hearing.
1. During a call, press
. The display shows
2. Press
again to resume your call.
WRITING TIPS
Press
to delete the last character or digit.
1
u
d
Press
or
to move between characters.
1
Press
to insert a space.
Press
twice to insert a dash.
4.2
View or dial an entry
1. Press
.
icon is displayed.
u
d
2. Scroll
or
to the entry you want.
OR
Enter the first letter of the name to search alphabetically.
The first name that starts with this letter or the nearest letter in the alphabet will be displayed.
T
u
d
Scroll
or
to the entry you want.
3. Press
to dial or
to return to standby.
NOTE
When the name is displayed, you can switch between the name and number by pressing
m
4.3
Edit a name and number
m
1. Press
. The display shows PHONEBOOK.
2. Press
. The display shows
d
3. Scroll
to
MODIFY ENTRY
u
d
4. Scroll
or
to the entry you want to edit, or search alphabetically and press
existing name is displayed.
5. Press
to delete the name if required, then enter the new name and press
m
existing number is displayed.
MELODY
1.
.
6. Press
to delete the number if required, then enter the new number and press
u
d
7. Scroll
or
to select a new ringer melody and press
8. Press
to return to standby.
This user guide provides you with all the information you need to get the most
from your phone.
To set up your phone, follow the simple instructions in 'Getting Started', on the
next few pages.
IMPORTANT
1
Only use the telephone line cord supplied.
Got everything?
•
C1LBI base & cordless handset
•
2 x rechargeable Ni-MH battery cells
•
Power adaptor for the base
•
Telephone line cord
If you have purchased a C1LBI multiple pack you will also have the following additional
items:
•
Cordless handset & charger
•
2 x rechargeable Ni-MH battery cells
•
Power adaptor for the charger
2. Getting to know your phone
Overview of your handset
Scroll Up / Volume Up / Calls
List
During a call, press to increase
earpiece volume.
When the phone is ringing,
press to increase the handset
ringer volume.
m
Press to scroll through the
menu options, redial list, calls
list and phonebook entries.
and press
. The display shows
DATE
SET.
In standby mode, press to open
m
the calls list.
Menu / OK
to confirm.
m
Press to open the Menu.
Press to select menu
m
options and to con rm a
and press
.
displayed option.
m
.
Talk / End Call
Press to make,
to confirm.
receive and end a
call.
* / Switch from Pulse to
Tone
Dial a *.
During a call, press and
hold to switch from pulse
dialling to tone dialling.
A
Recall / Switch Handset
on / o
Use with switchboard /
PABX services and some
network services.
Press and hold for 3
seconds to switch the
handset on / o .
3.5
3.5.1
If you have more than one handset registered to the base, you can make internal calls between
two handsets.
icon is displayed to indicate an internal call.
1. Press
3.5.2
When you receive an internal call,
displayed.
1. Press
3.5.3
You can transfer an external call to another handset registered to the base.
During an external call:
to delete the last digit.
1. Press
2. When the other handset answers, press
NOTE
I
If there is no answer from the other handset and you wish to return to your external caller, press
. Your external call resumes automatically after 60 seconds if there is no answer.
T
icon flashes on the display.
3.5.4
You can hold a 3-way conference call between 2 internal callers and 1 external caller.
to answer the call, or if the handset is on the base
During a call with an external caller:
1. Press
2. When the other handset answers press and hold
is displayed.
3. If there is no answer from the other handset, press
4. Press
3.6
The last 10 entries dialled are stored in the redial list.
3.6.1
MUTED
and your caller cannot hear you.
1. Press
2. Scroll
3. Press
4.4
1. Press
2. Press
3. Scroll
4. Scroll
display shows
5. Press
5. Handset settings
5.1
When you press a button on the handset keypad, you will hear a beep. You can switch these
beeps on or off.
1. Press
m
2. Press
3. Press
.
4. Press
5.2
m
When the battery is almost fully discharged, you will hear a warning beep every minute during a
ADD
ENTRY.
call. You can switch these beeps on or off.
m
and press
.
1. Press
m
. The
2. Press
3. Scroll
m
. The
4. Press
m
5.3
.
If the handset goes out of range, you will hear warning beeps during a call. You can switch these
. The display shows
ADD
ENTRY.
beeps on or off.
1. Press
2. Press
3. Scroll
4. Press
Display
Scroll Down / Volume Down /
Earpiece
Calls List
During a call, press to decrease
earpiece volume.
When the phone is ringing, press
to decrease the handset ringer
volume.
Press to scroll through the menu
options, redial list, calls list and
phonebook entries.
In standby mode, press to open
the calls list.
Mute / Delete / Back
During a call, press to turn mute
on / o .
In editing mode, press to delete
characters and digits.
Go back to the previous menu
level.
Phonebook / Exit
In standby mode, press to open
the phonebook menu.
When viewing the redial / calls
list / phonebook or when in the
menu, press to exit and return to
standby.
Pause / # / Keypad lock
Press and hold to enter a
pause (P) when pre-dialling
or storing numbers.
Dial a #.
Press and hold for 3
seconds to lock the
keypad.
To unlock press any key
and then press #.
Redial
In standby mode, press
Intercom
to open the redial list.
Microphone
Used to make internal calls
and transfer calls to other
C1LBI handsets registered
to the base.
Intercom
Make an internal call
I
followed by the number (1-4) of the handset you want to call.
Receive an internal call
icon flashes and the handset number that is calling you is
T
to answer the call.
Transfer a call
I
T
followed by the handset number (1-4) that you want to transfer to.
to complete the transfer.
3-way conference call
I
followed by the handset number (1-4) that you want to establish a conference call.
I
to connect all three callers.
T
to return to your external caller.
to end the call.
Redial
View or dial an entry
to open the Redial list.
T
u
d
or
to the entry you want.
to dial the displayed entry or press
to return to standby.
m
Delete an entry
m
. The display shows PHONEBOOK.
m
. The display shows
ADD
ENTRY.
m
d
to
DELETE ENTRY
and press
.
u
d
m
or
to the entry you want to delete, or search alphabetically and press
CONFIRM
?.
to confirm or
to return to standby.
Key beep
m
m
m
d
, scroll
to
HANDSET
and press
. The display shows BEEP.
m
to select. The display shows KEYTONE.
m
to select.
u
d
or
to select
ON
or
OFF
and press
to confirm.
Battery low warning beep
m
m
m
d
, scroll
to
HANDSET
and press
. The display shows BEEP.
m
to select.
m
d
to
LOW BATTERY
and press
.
u
d
or
to select
ON
or
OFF
and press
to confirm.
Out of range warning beep
m
m
m
d
, scroll
to
HANDSET
and press
. The display shows BEEP.
m
to select.
m
d
to
OUT RANGE
and press
.
u
d
or
to select
ON
or
OFF
and press
to confirm.
icon
. The