Motorola APX 1000 Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Radio Motorola APX 1000 herunter. Motorola APX 1000 48 Seiten. Butler regional interoperable communications system

Seite drucken

PREPARING YOUR RADIO FOR USE

 Attaching/Removing the Accessory Connector Cover

The accessory connector is located on the antenna side of

the radio. It is used to connect accessories to the radio.

Note: To prevent damage to the connector, shield it with the

connector cover when not in use.

Insert the hooked end of the cover into the slot above the

connector.

Press downward on the cover's top to seat it in the slot.

Once in place, tighten by rotating the thumbscrew clockwise

by hand.

To remove the accessory connector cover, rotate the

thumbscrew counterclockwise until it disengages from the

radio.

If the thumbscrew is too tight, use an Allen wrench to loosen

it first.

Rotate and lift the connector cover to disengage it from

the radio.

Hooked End

Accessory

Connector

Cover

Hex

Socket

Head