Motorola ASTRO Digital XTS 3000 Grundlegendes Servicehandbuch - Seite 21
Blättern Sie online oder laden Sie pdf Grundlegendes Servicehandbuch für Tragbares Radio Motorola ASTRO Digital XTS 3000 herunter. Motorola ASTRO Digital XTS 3000 48 Seiten. Handheld radio
Auch für Motorola ASTRO Digital XTS 3000: Benutzerhandbuch (12 seiten)
Seite drucken
Test Name
System Analyzer
Reference
Mode: PWR MON 4th
Frequency
channel test frequency
Monitor: Frequency
error. Input at RF In/Out
Power RF
As above
Voice
Mode: PWR MON 4th
Modulation
channel test frequency
atten to –70, input to RF
In/Out.
Monitor: DVM, ac Volts.
Set 1kHz Mod Out level
for 0.025Vrms at test set,
80mVrms at ac/dc test
set jack
Voice
Mode: PWR MON 4th
Modulation
channel test frequency
(internal)
atten to –70, input to RF
In/Out
PL Modu-
Change frequency to a
lation (radios
conventional transmit
with conven-
frequency; BW to narrow
tional, clear
mode, coded
squelch oper-
ation only)
Talkaround
Change frequency to
Modulation
conventional talk-
(radios with
around frequency.
conventional,
Mode: PWR MON
clear mode,
deviation, attenuation to
talk-around
–70, input to RF In/Out.
operation
Monitor: DVM, ac volts
only)
Set 1kHz Mod Out level
for 25mVrms at test set.
Talkaround
Change frequency to
Modulation
conventional talk-
(radios with
around frequency.
conventional,
Mode: PWR MON
secure mode,
deviation, attenuation to
talkaround
–70, input to RF In/Out.
operation
Monitor: DVM, ac volts
only) (**)
Mod: 1kHz out level
for25mVrms at test set.
*
800MHz radios only
**
The secure mode, talkaround modulation test is only required for trac mode radios which do not have clear mode
talkaround capability.
See Table 6
Table 8 Transmitter Performance Checks
Radio
TEST MODE,
4 CSQ
As above,
4 CSQ
As above,
4 CSQ
TEST MODE,
4 CSQ, output
at antenna
Conventional
coded
squelch
personality
(clear mode
operation) 4
TPL
Conventional
talkaround
personality
(clear mode
operation)
1 CSQ
Conventional
talkaround
personality
(secure mode
operation).
Load key into
radio 1 sec.
Test Set
Frequency error to be ≤
PTT to continuous
±1.2kHz.
(during the
performance check).
As above
Refer to Maintenance
Specifications page in
front of manual.
Deviation: 800MHz: ≥
As above, meter
3.6kHz but ≤ 5.0kHz
selector to mic
Remove modulation
Press PTT switch on radio.
input
Say "four" loudly into the
radio mic. Measure
deviation: 800MHz: ≥
3.8kHz but ≤ 5.0kHz
Deviation: 800MHz: ≥
As above
500Hz but ≤ 1000Hz
Deviation: 800MHz: ≥
As above
3.8kHz but ≤ 5.0kHz
Deviation: 800MHz: ≥
As above
3.6kHz but ≤ 4.4kHz
Comments
11