Motorola ASTRO Digital XTS 3000 Grundlegendes Servicehandbuch - Seite 32
Blättern Sie online oder laden Sie pdf Grundlegendes Servicehandbuch für Tragbares Radio Motorola ASTRO Digital XTS 3000 herunter. Motorola ASTRO Digital XTS 3000 48 Seiten. Handheld radio
Auch für Motorola ASTRO Digital XTS 3000: Benutzerhandbuch (12 seiten)
Seite drucken
Installing the
Battery
Removing the
Battery
Belt Clip
Installing the
Belt Clip
Removing the
Belt Clip
22
1. Turn off the radio and hold it with the back of
the radio facing upward
2. Insert the top edge of the battery into the area
at the top of the radio between the radio's
case and chassis. Make sure the three tabs on
the radio chassis align with the three slots
under the top edge of the battery.
3. Rotate the battery toward the radio, and
squeeze the battery and radio together until
the battery "clicks" in place.
1. Turn off the radio and hold it so that the release
button on the bottom of the battery is facing
upward.
2. Press downward on the release button so the
battery disengages from the radio.
3. Remove the battery completely away from the
radio
NOTE:
The battery must be removed from the radio
before the belt clip can be installed or removed.
1. Hold the battery in one hand so that the top of
the battery faces upward, and the back of the
battery faces you.
2. Holding the belt clip in the other hand with its
top facing upward, align the slide assembly on
the front of the belt clip with the slots on the
back of the battery.
3. Slide the belt clip downward toward the bottom
of the battery until the belt clip "clicks" in place.
1. Hold the battery (with belt clip installed) in one
hand so that the top of the battery faces upward,
and the front (radio side) of the battery faces
you.
2. At the top of the battery, press down on the belt
clip's metal tab and slide the belt clip upward
until it disengages from the battery.
3. Continue to slide the belt clip upward until it is
free from the battery.
Slide
Assembly
Belt Clip
Slots
Battery
Press
Down
Metal
Tab