Argus 802 CdS Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Camcorder Argus 802 CdS herunter. Argus 802 CdS 8 Seiten.

Seite drucken
LOCATING PIN
FI L TER SENSOR
FILM-TYPE IDENTIFICATION
FU.M C
TR OGE
NOTE:
your camera
accepts
films with speeds
of
ASA
25
or
ASA 40.
The Super 8 cartridge contains a continuous 50-foot run
of
film. The film is already threaded
in
its own transport system,
with guides, pressure pad, and take-up sprocket built into the
cartridge. A tiny portion of film is exposed at the front edge
of the cartridge, ready to engage
automatically
with your
camera.
Simply open the camera by pressing the COVER RELEASE
toward the rear, place the cartridge
in
position at the LOCAT-
I NG PI N, label-side up, press
it
down, and close the cover.
In this simple insertion procedure, two vital settings are auto-
matically made without your touching a single lever or dial.
FOOTAGE COUNTER
The camera's FOOTAGE COUNTER is automatically reset to
o
and will indicate the number of feet of film you have ex-
posed. When the counter reaches
50,
stop taking pictures, but
continue to run the camera for a few seconds to wind the film
through the cartridge to the end. (The
'motor
will seem to
speed-up slightly when the end of the film is reached).
2